Motodynamic Sequuential Led Tail Light

hi ,anyone fitted one of these to a 2019 ?
instructions say an older style relay is required ,seems odd as they have led's as standard

 

The warning might be for earlier model bikes which still have filament globes fitted ?

 

have one on mine, no problems

 

I have had the smoked version on my bike since new. So much better than the OEM. Here is a link to my mods build, it’s all in there. I hope this works.
https://www.thetriumphforum.com/threads/mods-for-the-rs.17136/

 

thanks ,so no need for the sub harness with resistors? what about the earths ?

 

ok ,my new triumph front indicators are not working now ,i went to show them off to a friend but the rears were disconnected , now warning lights on the dash, can i reset it by disconnecting the battery ?or will that flag up more issues?

 

I fitted one of these to my mates 2014 speedy, didn't have any issues. Did need resistors if I remember correctly.
Not sure what the problem with your indicators are?
Are your front and rears connected?

 

I've ordered a dealer tool so will see what's up with the fronts as they were working fine before I took the back off .cant understand why you'd fit a non led flasher relay and resistors to a new bike with led as standard for the motodynamic but who knows ?

 

On my '19 RS - no issues here. Been on there since new (July 2018) and working perfectly.

 

your will be non led though ,

 

No, I have aftermarket AFC led indicators on the front and it works perfectly with the stock relay. No resistors. No hyper-flash.

 

Was plug & play on my 19' RS; had to route wires under the seat since space is limited out back.