765 Running In

Depends what engine. I'm told newer engines need no running in. Can't do any harm tho. It makes basic sense to me to let assembled components bed in against eachother before giving them stress, no matter how close the assembly tolerances.
If it's brand spankers I'd just treat it like a cold engine (surely there's nobody here who loads a motor before up to temp) for the first 500, light throttle loads. There may be those who say running in does sod all but it also does sod all harm too.

 

Do what you feel happy with but remember the fastest bike to buy is the ex demonstrator thrashed from day one

 

It's a popular opinion


I've seen a couple of dyno studies that support the 'thrashed out the crate' treatment gives better dyno readings 2k down the line but until they're followed up with a 20 and 30k reliability test I'll take the chance of a 1% drop in peak bhp.

It just goes against my mechanical sensibilities, I've no logic to back it

So very likely bollocks. But it's what I do

 

Are you enjoying the bike? I've had 2 of them, a 2017 model and the 2020 both RS. They are in my opinion very naughty bikes, just begging to be thrashed and ridden on the edge, definitely a licence looser if you are not careful ! Just swapped to a BMW S1000XR for a little more comfort, I moved from the beautiful smooth roads of the Yorkshire Dales to Norfolk which suffers from corrugations on many of the B roads where I do most of my riding. The striple was just too painful for my damaged spine , soreluctantly i had to let her go.

 

I ran mine in loosely based on what Triumph recommend, but the most important is not to labour the motor, I went on some very tight back lanes for early miles, this keeps you dancing on the gear lever & variable revs all the time, it also gives the brakes & suspension a work out. Once the oil was changed at first service I didn't worry too much, just never held high revs long.
Ultimately I don't think running in is as important these days, are you likely to keep the bike until it's mileage goes beyond 30,000 or 40,000 miles?

 

I still have the stock tail tidy and have seen quite a few people have commented on the same issue you have since changing it. I was thinking of changing, but don’t think I want all the muck on my back.

 

IMHO the Street is a far better bike the Speed, certainly the gearbox is leagues ahead, & the handling is light & precise, I also found both the Street 675R & the 765RS more rewarding to ride than the big 1000cc bikes I had been on. The feeling that I could ride the wheels off the smaller bike without getting the near death experience of riding the 1000cc superbikes like they are supposed to be ridden!

Edit - A couple of threads I started when I had my 765RS which you may find helpful;

https://www.thetriumphforum.com/threads/suspension-setup-a-simple-guide-to-help-you.18373/

https://www.thetriumphforum.com/threads/765-rs-a-year-on-my-humble-view.14787/#post-200514

 

I'm a bit old school when it comes to running bikes in, generally following the manufacturer guidelines for the first 500 miles and the first oil change. Once this has been completed I then use a little common sense on working the bike a little harder..

 

had a few new bikes over the years flat out from day one never had a problem

 

Pretty much all been said.....

The biggest crime in running in is lugging the motor. Aside from that just build the revs. Ridden that way, brakes and tyres naturally follow.

 

AGR64
Welcome to the family. You sure have a cool steed there. The inmates will ogle the great picture for ages now. Thanks for sharing. Running the engine in is the revs just keep them down for a while.
Joe

 

There numerous you tube videos showing engine builds at the factory where they run all engines. They let them warm up and run the snot out of them, Every one of them. From Corvette to Harley to, yes, Triumph. I have put over 150K on a GOldwing and 109K on a Harley....when new I just rode them. Key is clean oil. I have my first Triumph, Tiger 1200Xcx, so time will tell.

 

Another old thread revived, I see. It’s happened a couple of times recently and made me realise that a few people, like @Streetgirl675, haven’t been seen in a while, which is a shame.

 

I’m with @Wessa on this one. The manufacturers know a lot more about engineering that I do so I go with whatever they recommend.

 

You've paid your money so you can take your choice.
Personally I warm the bike up for 4 or 5 miles then pin it. This is what I do before and after the first running in service, never had an issue and probably done 15 new bikes like this.

 

I've heard conflicting views over the years about whether to let an engine warm up on idle or get straight on and ride it normally, i.e. don't rev the nuts off it before it's up to temperature. That's what the manufacturer recommends for my car, anyway. I don't know which philosophy is right, or even if it makes much difference. I suspect a lot of these opinions stem from a time when engines weren't as refined and robust as today's units.