Wonder If Anyone Can Help Here Ecu Flash

Discussion in 'Triumph General Discussion' started by Garyg, May 14, 2017.

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  1. Garyg

    Garyg Well-Known Member

    Mar 26, 2017
    68
    78
    Aberdeenshire
    advice or help . Am doing up my much loved daytona 955i . I fitted aftermarket can highlevel aftermarket air filter bike seams to cut out when powering hard when i come to change gear . I noticed shes running very wet vapour coming out of can is wet when puting hand beside can. Ecu flash would cure this am sure . But can anyone on here flash my ecu for me . I got my ducati flashed for £30 on ducati site so am hoping for help on here if possible . Ive spent alot of money since getting the bike 5 weeks ago so would like her to run better please comment if you can help me
     
  2. GaryM

    GaryM It's him, you know who. Him from you know ....

    Apr 28, 2016
    862
    500
    Patna , Ayrshire
    As long as you have the appropriate map all you need is tunecu , a laptop and the appropriate cable.
    It's have the correct map thou.
     
  3. Garyg

    Garyg Well-Known Member

    Mar 26, 2017
    68
    78
    Aberdeenshire
  4. Garyg

    Garyg Well-Known Member

    Mar 26, 2017
    68
    78
    Aberdeenshire
    Am no use with computers mate i did have ago a few years back with a gsxr and made it worse so need someone to flash it for me
     
  5. GaryM

    GaryM It's him, you know who. Him from you know ....

    Apr 28, 2016
    862
    500
    Patna , Ayrshire
    Not sure if there's anyone that close to you Gary.
    Other options are your Triumph dealer or a place where they tune bikes up.
    Its not something I've had to do myself so not sure how it works.
    Let's see if any one else can advise you
     
  6. Sprinter

    Sprinter Kinigit

    Aug 17, 2014
    6,026
    1,000
    uk
    I am looking at buying a laptop specially for Tunecu
    As long as your laptop is capable of handling the programme ( new enough), then its download tunecu , download appropriate map , and load .

    I have read loads in forums and will post on here for advice.
    I am close to you,:confused: only I lack the experience using the tool so your on your own and could end up helping me at this rate.:eek:
    I have not read anything from new or old users about anyone getting stuck or causing any problems for there bikes. and so I assume its all straight forward or they dont admit their defeats.:cool:
     
  7. Garyg

    Garyg Well-Known Member

    Mar 26, 2017
    68
    78
    Aberdeenshire
    I sent the ducati one to a mate he did it for me was hoping for someone that does this failing that it looks like trying to get a power commander
     
  8. Garyg

    Garyg Well-Known Member

    Mar 26, 2017
    68
    78
    Aberdeenshire
    IMG_1637.JPG Little update on progress
     
  9. thebiglad

    thebiglad Old fart, still riding !

    Sep 25, 2013
    5,064
    1,000
    Central France
    Hi Gary, I understand that you say you are not very confident with computers but honestly with a laptop and the TuneECU program (free to download and use) and an OBD cable it's a straightforward job to do.

    The key to it is to save the map that's in the bike already, so IF anything goes wrong, you can always just go back to that.
     
  10. Sprinter

    Sprinter Kinigit

    Aug 17, 2014
    6,026
    1,000
    uk
    • Like Like x 1
  11. Garyg

    Garyg Well-Known Member

    Mar 26, 2017
    68
    78
    Aberdeenshire
  12. Sprinter

    Sprinter Kinigit

    Aug 17, 2014
    6,026
    1,000
    uk
    is that a new union jack decal ?
     
  13. Garyg

    Garyg Well-Known Member

    Mar 26, 2017
    68
    78
    Aberdeenshire
    no mate the original just masked off and sprayed
     
    • Thanks Thanks x 1
Loading...

Share This Page