Tuneecu For Android?

I’m using it on Android, helped me with the 12,000 mile service. I was able to reset the service spanner, balance the throttles check for fault codes, check idle speed.
I haven’t downloaded any fuel maps and I don’t want to as my bike has had the Hilltop treatment. What are you hoping to do with it?

 

I use a Bluetooth adapter, no cable involved. Like I said I've not done anything with maps so can't help there. The tunecu site will give advice on which is the best to buy.

 

Here is the one I've used, it's a bit more expensive but reliable.

 

There’s two versions of the Android app, make sure you get the full version which works with cable and Bluetooth and has the full functionality
The Lite version only works on Bluetooth

 

http://tuneecu.boards.net/board/8/

 

If you want a wired connection go for the Lonelec cable. There’s loads of info about them being the only ones that don’t get connection issues

 

It works well via Bluetooth and can even download your ECU map, but to upload a new map you must use an USB cable.

 

Google play only sells the full version !
The builder of "tuneecu" Alain supplies the "trial version" via his site.

 

If you read the full description on the Play Store it should tell you if it’s for cable and Bluetooth or Bluetooth only.
The Play Store UK version gives this in the description, showing as version 4.2

 

You’ll need an OTG adapter to connect to your Android device.
All this info is on the Tuneecu website and there’s guides on their forum. I don’t get why so many people seem to struggle with Tuneecu and getting connected

 

It's a new forum.Did you join?