Thruxton Thruxton R Luggage

Discussion in 'Thruxton, Scrambler & Trident' started by dav.a, Oct 24, 2018.

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  1. Spacefrog

    Spacefrog Active Member

    Oct 8, 2018
    141
    43
    Somerset UK
    How difficult are they to fit Glyn, is it alot of work, how long would it take you to fit…?
     
  2. Glyn Phillips

    Glyn Phillips Old’N’Slow

    Jun 21, 2018
    967
    750
    Essex
    #22 Glyn Phillips, Mar 22, 2019
    Last edited: Mar 23, 2019
    I’d say about an hour, loosen the pinch bolts on clutch side, remove throttle side mirror and loosen throttle side pinch bolts, slide both bars towards the centre and remove both circlps.

    Undo top yoke centre nut and fork clamps, remove both handlebar locating bolts into yoke, undo both bars slip on retaining bolts.
    Remove the top yoke, slide up the handlebar mounts, once off the forks remove the bars from the clamps and refit in reverse

    Sorry before you start you need to undo the headlight carrier to remove the clip on yoke bolts
     
  3. motomi1

    motomi1 New Member

    May 29, 2017
    20
    3
    Arizona
    A couple of weeks ago I did about 220 miles on it of highway riding and it proved to be painless. The wind took a lot of pressure off of the wrist/hand position and a Kaoko (sp) throttle lock also helped.
     
    • Like Like x 1
Loading...

Share This Page