Good day Scramblers, This is my install and review of TEC bar end mirrors on my 2023 Scrambler 1200 XC. The install was easy and the parts/materials are top notch. I would recommend these for anyone wanting quality bar end mirrors. https://www.tecbikeparts.com/ If you live in the States and want to order TEC, here's where: https://www.tecbikepartsusa.com/default.asp Here's what's delivered: Packaging is excellent! TEC includes parts for installations with or without hand guards, so don't overthink that you are going to have parts left over. Removal of the OEM stock mirrors requires a 6 mm Allen wrench, that unscrews from the bottom. To put the mirror/stalk together, you can use the TEC provided allen wrench or your own 5 mm allen wrench. Now just remove the OEM end caps with a 4 mm allen wrench, then slide the rubber spacers as needed (you'll have more than you need) and slip the bar end mirror over the spacers, tighten that down, then install the TEC provided end caps and snug the mirror assembly up against the tightened end cap.