T100 Footpeg Isn't Smooth

Discussion in 'Bonneville' started by Guillermo salinas, May 15, 2020.

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  1. Guillermo salinas

    Guillermo salinas Active Member

    Aug 17, 2019
    108
    43
    Azusa
    My foot peg is not retracting smoothly like my other one. I took it apart and found that there's a groove and the little ball indent does not move? Is this how it's supposed to operate? Is that groove manufactured or did that occur with with a malfunction? It looks to me like that ball indented supposed to have Grease.

    20200515_063552.jpg

    20200515_063424.jpg

    20200515_063409.jpg
     
    • Like Like x 1
  2. joe mc donald

    Subscriber

    Dec 26, 2014
    9,486
    1,000
    slough / burnham
    Guillermo Salinas
    Yes nothing wrong there Behind the ball bearing is a spring grease them up Maybe stretch the spring a mm or so to strengthen it. The marks are just the travel of the ball bearing yours has had a lot of folding up and has just worn it a little more nothing to worry about.
    Regards
    Joe.
     
    • Agree Agree x 1
  3. Guillermo salinas

    Guillermo salinas Active Member

    Aug 17, 2019
    108
    43
    Azusa
    Joe,
    I put it back together added some lithium grease and magic. Smooth as buuuuuuter. I'm going to do the other one.
     
    • Like Like x 3
Loading...

Share This Page