have you got the origonal bolts to replace the ones that come with crash bungs. Check out the Evotech ones too. https://evotech-performance.com/products/triumph-street-triple-r-crash-bobbins-2017
Br5yan, I am flogging the whole set, bolts blocks and caps, if I swap with someone then I will just send the nylon blocks, with agreement with the other person if that happened
one set of them has offset spacers and different length bolts, so if you remove completely tape together and mark on them which side they fit on.
Bryan, thank you for the heads up, I would not mix components up as removed, labelled and bagged if possible. I have built a few specials over the years including this little beauty
I am from am engineering back ground, and I soon learnt that it is a lot harder to re build than to break down.