Hi, do I need triumph to program a genuine quickshifter from triumph on my S or is it just simply plug and play? TIA Lewis
I recently ordered one but haven't installed it yet, it seems to be plug and play according to the manual.
That's what I'm hoping but I've been reading that it needs a software to be installed. I've asked triumph dealership just waiting for a reply
Nah, its not needed. Check the manual https://triumphinstructions.com/ProdDocs/A9930428-EN.pdf I can't see that the manual states that its needed. But IF they get back to you and say it is...do let me know Edit: Make sure the dealer isn't just chancing it, the manual states its only the newer Speedy 2018 and above that needs a new software. They also have the feature of QS up and down in gears. Edit2: Ok, so have read the manual again...now I did feel that it was obvious at the time its only VIN 867685 and above that need a new software. Cut and paste from the manual: "Speed Triple S from VIN 867685, Speed Triple RSNote:•The correct engine calibration must bedownloaded to the motorcycle ECU prior tostarting the engine. This information can befound on the 'Triumph Online' dealer web site. But reading on I can see how its not 100% clear that this doesn't apply to all the bikes. So please share the feedback from the dealer
Thanks mate!! Btw are you getting a triumph part or aftermarket one? Looking to get a triumph part of ebay because it's a lot cheaper than dealers. And wondering if the aftermarket ones are any good...
I went for the Triumph part as they can be found cheap these days for YM 2016 and 2017 S / R (Speed Triple S up to VIN 867684, Speed Triple R from VIN 735337). I payed €133 for mine which is peanuts compared to what they used to be priced (and still are in some places). They still seem to have some in stock, check out the link below. https://www.triumphworld.de/product_info.php?products_id=194699&language=en Doublecheck your VIN so you don't have one of the newer speed triples (VIN 867685 or above), then you need another kit which is called TSA shift assist.
I fitted one to my 2017 R and it didn't need software, so you should be OK. Make sure you refit the shift rod the right way round, it's left hand thread at one end and right hand thread at the other.
Ok, just installed my QS. No software update needed, finding the connector for the QS was a bit of a pain, search the forum to get a few pics of what it looks like. Oh, if you have a pair of ladysized hands it really helps.
Yes!! It was such a pain looking for the connector and getting to it is a nightmare.....but managed it and it works great
