Thruxton Problems Fitting Weslake Pro Shortie To Thruxton Rs 2022

Discussion in 'Thruxton, Scrambler & Trident' started by Kyle1, Feb 26, 2023.

  1. Kyle1

    Kyle1 New Member

    Feb 26, 2023
    0
    1
    Northumberland
    Hi All,

    I'm having problems fitting the right hand slip on of a pair of Weslake Shortie Pros to my 2022 Thruxton RS.

    The LH one goes on easy...the right one on the other hand.....

    The angle seems to be to shallow and puts the pipe hard up against the swing arm on the RHS. Any suggestions....?

    Cheers,

    K
     
  2. Flashp

    Flashp Noble Member

    Dec 6, 2017
    595
    343
    Hants
    Can't help directly, sorry but have you photographed the issue and emailed them?
     
  3. Mark9

    Mark9 Noble Member

    Jul 13, 2020
    564
    343
    Derby
    Kyle, mine fitted easily with no issues, it’s possible that there is a manufacturing issue with yours?

    here are some photos, do yours look the same? E43A2D29-529C-4D1A-9D2B-A83F8A5C786D.jpeg FBBE2F63-AD33-4382-B6E7-2291E6D213C8.jpeg 32802015-89D5-483D-9CC5-4C727F290E58.jpeg
     
  4. Kyle1

    Kyle1 New Member

    Feb 26, 2023
    0
    1
    Northumberland
    Thanks for the replies.....the issue is the angle of the pipe/slip on being insufficient to clear the swing arm. Its like the pipe or slip on need more 'bend' in them. Whether that is a manufacturing issue or one intrinsic with the 2022 Thruxton...I'm not sure.

    Bugger.....cos they look great.
     
  5. Mark9

    Mark9 Noble Member

    Jul 13, 2020
    564
    343
    Derby
    If you take the silencer to a fabrication shop it would be simple enough for them to alter the angle, even if the had to take a slice out of it and re-weld, I had similar done on an oil tank outlet on a special I was building, he took a slice (think peach slices) out of one side of the pipe, bent it to close up the gap and welded it.
     
  6. Kyle1

    Kyle1 New Member

    Feb 26, 2023
    0
    1
    Northumberland

    Great idea! Thanks Mark.
     
Loading...

Share This Page