I have a Speed Tiple 2009 (1050). 19.000 miles The bike is loosing a lot of water (not visible on the outside). I ended up with a mixture of oil and water in both oil and water circuits. After 100 miles the whole brand new oil was contaminated completely. - Header gasket looks OK and i cannot detect any cracks in the cylinder head I am thinking about pulling the cylinder sleeves and re sealing the bottoms. BUT before i do that: Does anybody of you have any other idea of the root cause? (i doubt it is the breather pipe etc... I have a massive leak here!) https://urldefense.proofpoint.com/v...JAe7kFO_CBUs2PVE_AwUZZI2ncNl43c5cmSBX4hPlY&e= https://urldefense.proofpoint.com/v...r8vUwVGNsQi3Sqic-748fn_gl4rTXqZqhYf7Tebgl4&e=