Hi COT - do these fit straight on without having to modify/replace any cables please ? If so, please put me down for a set too (2016 T120) - pls pm me details. Cheers Chris
Yes, thank you. I call them a PM but this site calls it Start a Conversation. Thank you for the translation.
I looked at those, thought better to make my ones, as the are not so busy. I can powder coat them for another £6 so they blend in with the top yoke.
I’ve just fitted a pair of these risers of cupoftea and I can say the quality is excellent and what a difference they make very happy
I need some made for the above, at least an inch in height. I like the look of the ones on page 1 of this thread. Heres the underneath of my stock SM risers.
That would be great @Cupoftea tea. I has hoping to buy the shaped ones so the bottom of the risers would sit nicely on to the rubber cones/bushes and the top would fit into the bottom of my stock risers as shown above. I am happy to send you dimensions if you need. Black satin or gloss in colour would also be great. A slightly longer flanged bolt is something I am looking for as well, so that about 20mm of thread is in the riser. Let me know your paypal address and how much. Thanks ...
@Cupoftea sorry at work at the moment, thanks for getting back, its a 2020 speedomaster the overall diameter of the base of the oem riser is 32.5mm and the next ring in is 2mm then it chamfers in about 3mm the next ring is flat and about 2mmthen it drops down about a mil maybe more and the final ring measures 5.9 mm...you get the basic idea, as far as I am aware the yoke should be the same for all bonnies? I think the bobber black has girthier forks? Not sure ifthat makes a difference. The ones you made on page 1 look spot on. I am based in Dorset, near Bere Regis.