Having just collected my 2013 Bonneville SE (A2i believe) I’m having trouble finding a centre stand kit on the net....if anyone has one or can point me in the right direction please
There are a few on eBay: https://www.ebay.co.uk/itm/Triumph-Bonneville-T100-Centre-Stand-Kit-A9758008/303590702822 https://www.ebay.co.uk/itm/Triumph-...e-Stand-Kit-A9758008-63-OFF-RRP-/173878725928
Thanks for the replies...in my short time of ownership I’ve learned that a T100 stand will not fit...due to the spoked wheels being bigger than the 17’s on the SE ( cast) unless someone can tell me otherwise?
I did actually buy the stand for fitting to an SE, it was needed because I had fitted some taller Hagon shocks to the SE. I sold the bike before I got round to fitting the stand....
Not sure on the difference can only assume the t100 type would be slightly longer because of the bigger front wheel so should be fine for the se
I believe I’m sorted thanks to tcbandit... I have come to the conclusion that the ohlins fitted to my bike are longer than the standard ones...and that will explain the excess lean on the side stand there’s a grab rail on it that is not bolted to the top of the shocks as well... to make it line up you’d need to lower the shocks as the holes are a good inch below the level of the shock bolts