Tiger 800 Baffle Removal

Discussion in 'Tiger / Explorer' started by billyandmollysdad, Jun 26, 2019.

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  1. I've tried removing the baffle from the Arrow can on my tiger, but it doesn't seem to want to come out.
    Obviously, i've removed the small bolt at the end, but it wont budge, am i missing something ?
    It's not the end of the world if it won't come out, i just want it to sound like it should :cool:
  2. Glyn Phillips

    Glyn Phillips Old’N’Slow

    Jun 21, 2018
    Try it when hot as heat does generally break tight joints
    • Like Like x 1
  3. Johnjo

    Johnjo Senior Member

    May 29, 2017
    I tried several times to remove mine, all with abject failure. My local motorcycle shop couldn't remove it either.

    A car garage with a biking owner eventually got mine free with a slide hammer. Cost me 20 quid. Money well spent IMHO. Great sound with it out. Seat of pants dyno detected a couple of extra bhp too.

    Good luck with removing yours.
    • Like Like x 2
  4. Thanks Johnjo, i'll get one of our engineers at work to get the hammers out ;)
    • Like Like x 1

Share This Page