Separate names with a comma.
Brilliant. Great minds think alike. Already found this and the info is great. Understand more what has been done previously. For my set up it...
Ok. Stripped carbs for cleaning and took some measurements. Float heights 14mms spec 16-18mm. Main jet 125 in both. Exhaust TOR 9601023 & 9601024...
Yeah...Can't fault your assessment mate. Was probably being a bit unjust. Don't get me wrong...really like the bike, the heritage, simplicity to...
No worries just can't believe....and I'll probably get shot for this....how poor quality and unreliable these Hinckley beasts seem to be. The...
Yep, Thats the fellow. Will order one from TTP. Thanks. Invaluable help as ever mate.
The TPS had the factory blue paint? marking to align the TPS to the carb body. as this will probably come off in the cleaner have carefully used a...
If you mean main fuel hose that goes from tank to carbs pt T3620008 Then mine definitely hasn't got any gauze. Just piece of 8mm bore fuel hose....
Have ordered an Ultrasonic cleaner and some carb cleaner specifically for cleaning carbs and removal of varnish. many years ago tried cleaning...
Ah....What inline gauze filter! Mine hasn't got one above T piece. If it's not fuel carbs certainly aren't helping matters. Have never seen so...
Yeah me too. read somewhere that if TPS fail in these it's a new carb! Ridiculous mate. More am researching may try a soak and clean up on my...
So, like on other carbs, the TPS can be removed? I know most carbs are either Mikuni or Keihin but it's unusual to me that Triumph don't suggest...
Yeah, Done a bit more research in between tonights work requirements, You tube Johnny cactus) has removed his TPS when rejetting and Triumph Twin...
Needing to have my carbs thoroughly cleaned (see thread "pick up coil") as very gummed up/coated in varnish. However, How can they be ultrasonic...
yES..aM DETERMINED TO KEEP POSTING UNTIL RESOLVED. Whoops...hit the CAPS key. Had another odd hour before setting off to work so tackled the float...
Yeah. Pugs One of first things I did. Yeah silly me re sidestand...worked that out shortly after posting. Have removed carbs because there was...
Oh also, misfire seems to clear enough to restart when on sidestand and why does Haynes manual advise idle adjustments with bike on sidestand?
Well ran for 45mins on and off and still have the problem. When warmed up completely and ridden misfire and eventual stalling occured. Stayed...
Well despite only few hours sleep I was woken by postman delivering my new TTP Igniter. Fitted in ten minutes and started bike from overnight...
Yes...I hope it is the igniter. Seems funny how started happenning after valve adjustment though but probably a coincidence. Will have more time...
Nope...rev counter does not die when misfire and subsequent stall occurs. When checking valves I did not disturb any wiring in headlight. What do...