Separate names with a comma.
Ah thanks. Pretty similar to the RD adjustment then!
Download a diagnostic kit? Blimey this getting too technical for my skills. :eek:
Once warm my Bonny [2003 Hinckley] ticks over on 1000 or just under, this about right? Seems a tad low but I've been use to 2-strokes which rev a...
A life time in fact!!
Ah now that's interesting because the bracket that attaches to the silencer may be missing something. It's a plain old bit of meta, without...
Yes it is the 790. Reckon i'll do as suggested, get a new filter and double check it over the next couple of weeks. Looked fresh-ish oil rather...
Got a minor issue with uneven running at low revs/tickover so had the air filter out this afternoon and half of it IS sooty, other half clean,...
I accept that the recess has to be bigger than the hole [obvs]. I've measured it and the hole in the stand is approx. 5mm, the recess in the...
Ah I solved my own mystery. It's one that the previous owner fitted over the yolk centre nut. Good fit, so much so I mistook it as factory...
It's an analogue clock rather than a digital one. Still surprising to me that Haynes WSM doesn't mention it, nothing at all. I looked in the...
Simple question here, how do you alter the time on the clock on the Hinckley. It's about 3 mins slow. Again though no mention AT ALL about it in...
Sounds like a good idea there. Had any problem with slippery nuts [ooh er misses] when you use it? Actually I am a fan of WD-40 but the same...
How do these come off? As there is a connecting pipe running across the frame with no way to remove it and then remove the down pipes?????...
IT WORKED!! Had to drain down the oil and loosen the oil pipes to be able to shift the cooler around and successfully rammed a 12mm [the right...
Ok this may be me being really stupid but here goes. Needed a new centre stand rubber so got on to Triumph motorcycles and new one duly arrived,...
What I didn't mention was on the L/H side both exhaust studs came out as the threads and nuts were so rusty! The reason I decide to do a 5 minute...
After I posted I read up a bit more and you canna really take the oil cooler off without draining down. Pain as only changed the oil Saturday.
Can this be removed without draining down the oil? Need to gain access to one of the exhaust nuts which has rounded off and is a pig for access...
Thanks Biglad, I thought the centre stand spring had given it up as it was flappin' about a bit but turns out the r/h bolt was working itself...
Does the 2003 Hinckley Bonnie have a centre stand rubber? Silly question but i'm totally new to it. It's not there where the stand touches the...