Separate names with a comma.
Yes, with old tires and old front disc there was no vibration, but who wants to keep running on 25 year old tires and tubes. See my most recent,...
Update: New front tire replaced the new tire that was out of round. Front end balanced, wheel checked for roundness, fork oil changed, wheels...
Thank you for your replies. The tire was refitted and the hop remained. The bearings were replaced and there is no stickiness in the rotation of...
1977 Bonnie front wheel. Mounted a new Dunlop K81 and tube over a year ago. Bike was stored for shipping for one year in garage. Now that I am...
[ATTACH] [ATTACH] New problems. When replacing the front end bearing "right" side, do both dust covers with bearing in-between and clip go on...
TY
TY, Found on line. Taps out right to left and will also drive out the left side baring.
Found the answer on line. Axle taps out from the right side to the left after removing spindle nuts and this will also drive out the left side...
When changing a front tire, the motorcycle shop did a job on my dust covers with their tire jig. The retainer clip was broken off and the dust...
I haven't seen a power increase, but the bike does run smoother. Without making any adjustments the bike will idle without stopping and response...
What effect will 110 Octane Leaded Fuel have on my 1977 Bonnie with the original engine intact? Will mixing this fuel with 93 Octane Unleaded...
[ATTACH] Original owner: Assembled October 1977, Purchased March 1978. 34,000 original miles, I took the bike to Japan for one year 1985 and...
I put the shaft into the housing, placed the spring on top with the cap, used a "C" clamp to press it on and it worked..... Sometimes when things...
How does the primer tickle cap stay on the shaft....
T140V....1977....Bonnie......Is there an easy way to change the primary chain with removing the stator and clutch?
Is there an easy way to change the primary chain without removing the stator and the clutch?
That seat looks great!
Assembled October 1977. I Purchased my Bonnie in March, 1978 from AJ Cycles, Turners Falls, Massachusetts. $1850.00. 34000 original miles,...
My tach jumps all over the place....Any suggestions as to how I can fix or suggestions for replacing my RMS 3006/00 Smith Tachometer. Is there an...