Search Results

TBirds have been notoriously finicky when it comes to load equalizers. All work fine with the engine off but with the engine running, the ECU gets...

The question is for a TBird Storm, that idea may be suitable for the previous model TBird, but not from 2009 on.

The ECU has the smarts to do this.

There is no relay to swap over....inline resistor is the way. You can do without resistor, but the blink rate will increase and may not meet your...

1. Have you tried with the bike running ? 2. LEDs are polarity driven, + or - wires may need to be swapped around, check with a multimeter.

Triumph AUS and UK did not assist. Not surprised ! Many thanks to John Titman Racing....legends... https://www.jtr.com.au/

Bump ?

Bump ?

Found this on another forum https://www.triumphrat.net/air-cooled-twins-technical-talk/387858-wheel-offsets-on-stock-thruxton-wheels.html...

Just an update, Tried a longer drill bit but when these are a smaller dia, they usually have a reduced flute length. This results in having to...

Cheers crispey, Stepped on brake side. Vapour blasted hubs, Hand polished all spokes and nipples, Relaced, Now off to be trued.

Sorted the front and have now relaced the rear. I deliberately placed the spacers back on the axle when removed and went to re-greased them back...

Cheers Crispey, sorted.

Laced up the front, not as bad as I thought....is there a disc offset measurent ?

Now realise that they have a longer neck because they overlay the shorter. Same side hub, long, short, long, short....repeat

Cheers Pat, 1 last question, can I sub in whisky for beer ? Maybe overthinking, but without hollow bars, how else ?

Yes using stock solid bars. I think I would need to drill up to the switch block and then drill down from the side to meet up at 60-90deg. I then...

No thoughts ?