Separate names with a comma.
Careful you don't get a nosebleed though!
Here's another lowering link setup: http://jack-be-quick.com/products/tiger-1050-2007-2017/
I have them on my TB1600 and like them. They absorb vibration and are a bit bigger in diameter, which works for my arthritic hands. You can also...
I believe the mileage is stored in the cluster, so if you change it, the mileage from the old bike comes with it. Also, I think you'd need a...
Jack-Be-Quick.com will soon have one that should work on all newer Triumphs with gear position sensors integrated into the ECU. It plugs into the...
No remap required with stock mufflers & stock or K&N air filter. That's my setup, and I'm quite happy with the results. If you go with...
Ha I have done K&N and cat bypass without re-map. Runs great.
Here's the first step without map change. Look into the mufflers later. http://jack-be-quick.com/jack-shop/jack-shop-3-2/
www.Jack-Be-Quick.com is nearly finished with their R3 lifting system. It stays attached to the bike so it's able to be used away from home in an...
I have a '12 TB1600 and it's a joy to ride. Very heavy (dressed is 800lbs) but weight seems to disappear with motion. No major problems at all....
Below is a pic of where the cheeky exhaust came from.[ATTACH]
Well, I guess they're never really "done" are they? But in it's first stage; it runs quite well now, and confidence inspiring on the gravel roads,...
Welcome DR., I had a 2006 carbureted America for 35,000 trouble free miles. Tires, batteries and fluid/filter changes. That's it! Oh yeah. I was...
Happy new year, guys! Nice chilly day today... about 44*. I put about 100 miles (on the T-Bird 1600) When I got back, I synched the Legend's...
UPDATE Sure enough, the reserve pickup in the petcock was filthy; clogged with debris. I cleaned it out, and all is good. Also, I got my snych...
Ran the bike yesterday for about 25 miles, staying pretty close to home. It died once (about 5 miles away); I know there was at least 1/2 gallon...
Well, after the main jets were on back order from J&P, I finally found some 150s at the local Honda shop (more than double the price), I did get...
It will likely quiet over time, too. Mine used to make the same ticking, now has 12K miles and has quieted down.
I did a valve clearance check today. All OK except #1 exhaust too tight by .05MM. I hope that's what caused the misfire! I'll run down to the...
Well now, that's a possibility. The sidestand switch is operable, but the clutch switch cutout is not.