Separate names with a comma.
Just realised I’m going to need 12 valve stem oil seals! Triumph original around £12 each (ouch)...other options on eBay £3 each, as pictured...
I was told the head gasket was blown by a very experienced bike mechanic...difficult start, rough running, new thermostat cap already insitu,...
:)Hi, there...a couple questions? A) should I assume my thermostat is finished if the centre pin pulls free of the thermostat and remains in the...
Hi, I don’t suppose anyone out there would know whether a ‘99 Clip On will fit my ‘97 model per chance? I’ve seen a few advertised that state...
Been looking to find a quality Torx 50 male bit, and decided on Snap On for the extra £10 it costs over the other ‘quality’ offerings, Facom etc....
Hi Does anyone who’s removed the valves from a 955 triple head know, or are able to confirm, that the dimensions of this valve spring compressor...
Does anyone know whether the head bolts on a ‘97 T595 would be Torx OR Torx Plus? Also, for anyone reading this...if you have any insights into...
Oh, dear...not holding out a lot of hope here! The head bolts on my T595 have been used before and are worn. They’ve all cracked half a turn...but...
I’ve taken my T595 down pipes off to find that they’ve previously been bandaged with glass-fibre lagging. Question: Should I tape the three of...
Can anyone explain to me why all the valve clearances on my T595 are tight? None of the inlet valves will even take a 0.05 gauge, and the exhaust...
Does anyone have any positive experiences OR nightmares when it comes to saving a couple of quid on unbranded gaskets from eBay? Example:...
Hi, I’m going to be pulling the liners on a T595 in the coming days, and was wondering about sealant recommendations for reseating them? There...
Can someone confirm whether it’s part no 2 on this parts-list link that has the frequently snapping springs on the T595 clutch?...
Hi...firstly I apologise because I’ve repeated this post in another forum, just in case you see it...I’m a 50 year old who’s just got excited...