Search Results

Just seen the same from Tom the forum moderator. Fingers crossed

Just last night I have experienced the Tuneecu update problem ! It has always worked perfect and now says unit unregistered, so I to am going...

I use tune ECU with Android and the correct triumph OBD blue tooth module. You can reset the light and choose which mileage intervals you want it...

I will report back later on the road test, as I have decided to do the coolant change while on the bench, and that's more work than the gearbox...

The cost for parts is £180 Here is the parts list. Ignore the knock back boot, that's a cover for the base of my mirror ☺️ [ATTACH]

A quick footnote, when assembling the shaft, the end spring needs to cross over to be tensioned. [ATTACH]

Now just plug in the gear switch, and replace the expansion tank, and cover. With the gear lever reconnected, and the punch mark lined up, check...

Now the cover can be replaced, but first I gave all the new parts a coating of oil using clean engine oil, just they don't start off dry. Next put...

Once in the abutment sleeve can be relocated using a small Philips screwdriver up the inside.

Next will the assembled Shaft, and inner washer ON the shaft as opposed to Triumph saying hold it in place with grease. Direct it towards the rear...

With everything cleaned up, I replaced the detent wheel using a new bolt, everything locates on pins so you can't get it wrong, and torqued it to...

Now time to clean up the gasket faces carefully, a little bit of brake cleaner eases the stubborn bits. Replace the oil seal in the cover, the old...

Now with my box of parts I can build up the new shaft using the old one as a pattern. And change over the detent wheel, which needs a wiggle over...

Here is the side by side shot, and the new part number. [ATTACH] [ATTACH]

The old shaft showing slight ware on the hooks, but the new shaft has hooks 2.5 mm longer, which will make much more positive engagement with the...

The old shaft showing slight ware on the hooks, but the new shaft has hooks 2.5 mm longer, which will make much more positive engagement with the...

Now with everything on the bench, time for a cuppa and look at what we have... [ATTACH] [ATTACH] [ATTACH]

With the shaft removed I decided to replace the detent wheel as well, as it's going to have worn with the old shaft, a bit like your chain and...

The shaft also has a washer at the other end, and this is the tricky bit, removing the shaft with a steady hand, playing operations as kid will of...

With the cover removed, the first thing to do, is recover the washer from the end of the shaft, just in case it drops into the engine, which would...