Search Results

I would think most cars have hydraulic lifters these days, so self adjusting. I think we don't see them on motorcycles as they are mostly higher...

Difficult/rough cold starting is classic symptom of no valve clearance (my son running an old ZX6 on a tight budget was once told by his MOT...

Must be for your American legislation, no doubt your fire department requires a manual isolation switch? Probably Hardly Dangerous's fault for...

It's so embarrassing when you see that connector not 15cm from the indicators that wasn't there yesterday (it won't take too long to put the bike...

.....and it's snowing outside......does that mean I'm gay :scream::scream::scream:

Did similar on my Speed Triple and SWMBO's Street Triple, not quite as flash as you though just went for matt black vinyl.

[ATTACH]

Thanks - "Fill your boots" linked here.... I had initially looked at using a couple of round Triumph LED lights as first fitted to the bobber and...

@Katos valve clearances should be checked every 12k miles, so you need to check the bike service history, it may have been done recently.

Hi Katos and welcome to the best motorcycle forum on the 'net, you will have to tolerate the British sence of humour though. :) If you're...

I could give you a very long check list..... ;):mad:

Probably just needs cleaning out, either water or dirt on the contacts. I had very similar on a Multistrada back in 2013/14, this is the trouble...

I had a '13 plate Multi (got rid at end of warranty due to its numerous faults), no roasted nuts but the rubber bump stop for the centre stand was...

[IMG]

[ATTACH]

[ATTACH]

Sprag clutch on the starter would be what he said, was a potential problem on early Triumph's, but not really now, the ecu prohibits starting if...

Welcome Chris. You definitely want a BLACK 94R, not that I'm biased at all. ;)...

[IMG] bugger, I knew I should have answered that email. :rolleyes: