Separate names with a comma.
As it's 2 year don't forget suspension linkages need a lube too
Body parts. Yes. Don't know where you are but Clive Wood is the man to see. He's near Boston but worth the trip. The efi on these are hard to set...
Yes harpic power 10 is great. Loads on YouTube.
Nothing new then. Same old culprits time after time. Glad it'srunning ok now
I' running zxr400. It 1/2" bore size. Front I use radial from daytona 675.
A forum is only as good as its contributors, so pat yourselves on the back!
Have you checked valve clearances? Inlets can go negative
The pilot jets are next to main jets not to be confused with pilot screws. These have 75% of all carb problems. Have you cleaned out the duck...
If done by a triumph dealer around £600. But certainly as Steve said gong to be above £350. If I had it done I would make sure I kept it....
Look closely at the receipt for the 24k service. Was it done by a main dealer or back street. You really need a triumph tick sheet. Some think an...
Is your rear tyre fitted the right way round? Looks odd
They were only made for 1 year but are pretty vice less. Only draw back is the efi is hard to set up and not many main dealers now have...
650 if you can. Better mid range.
Yes linkages need attention. Re hub. On the ST the caliper carrier is anodised but on the GT it is painted, but where it fits onto the hub is bare...
Didn't Delboy take off the tec shocks and then fitted YSS?
pm sent
Jack Lilley mail order. Call them and give them your vin number then you know you will get the correct part. Btw. WoT charge 5% over retail. If...
I am glad you went to see Clive. As you say he is more than happy to pass on to you his knowledge (which is vast when it comes to triumph). In my...
You've really confused lots now. Many call aluminium "alloy". So saying steal alloy they must now think chains are made from aluminium.
Where are you Kevin?