Separate names with a comma.
Yes, sorry I forgot to mention I also upgraded to Hagon progressive springs up front and Hagon rear shocks, massive difference gained.
Welcome to the forum Tony. Great choice of bike, keep it sprayed up with Scottoiler FS365 or similar if you are using it through the winter....
Great bikes, bottom end torque and handling fantastic.
Welcome to the forum. Great choice of bike, centre stand essential in my opinion. Fit a Scottoiler or similar chain lubrication system and you...
Silk inner gloves with good quality waterproof winter gloves will keep your hands warm and dry for 30-40 mile rides in cold weather. Distances...
Beware of left hand threads :kissing:
Buy one of these Bike jacks, they always come in handy. circa £35 Bloody hard pulling the bike onto the centre stand on 1" thick wood. Bike Jack,...
The stock mirrors are not designed to be moved daily, this will definitely wear and stretch the threads leading ultimately to loose fittings that...
The only thing that has spread by the look of it is the monkey metal riveting tool. Reynolds riveting tools are a great piece of kit to have.
Alpinestars new land gore-tex have a good thick sole on them. FC-moto £159
Welcome to the forum Gr..... Definitely change the oil and filter, if it was last done in 2011 Valves are safer a bit on the slacker side, have...
What make and type of riveter did you use a Sprinter ? Looking at the pics, I would have liked to seen some spread of the rivet and there doesn't...
I reckon Stollydriver is on the money. Leg goes out for a stretch to shake the cramp off. :eek: Nothing to do with technique or weight...
Should be able to confirm that for yourself BC Can you gain access to undo the rear spindle nut ?
Well done ND, you will have saved yourself a fortune repairing it yourself. The copper crush washer is there for the sealing and gives a little...
Just the job for getting your own back on that cement truck. Ram him Mr O. :p
I will presume you topped the oil up as well then :p
Shocking service if you ask me. Firstly they should be wanting to investigate why the first pin has nearly F***ed your caliper. They may have a...
Put a new nib on and some oil in, you won't regret it. You can buy any of the replacement parts from Scottoiler. I was looking at converting to...
It's the 30mm difference that would concern me a bit Gary.