Separate names with a comma.
When adjusting clutch play you slacken off the adjuster at the handlebars first, then remove the inspection/adjuster bung on the primary cover by...
That looks far better :-)
69 T120 should be pos earth from the factory and it was red. The neg feed wire is brown/blue with a fuse, so yes use the green wire going to earth...
You have a magnetic speedo, not correct for a police bike but correct for a 67 bike. There are two cables listed for your bike, one is part number...
Police bikes used the chronometric speedo so would have probably had the gearbox drive casing from 63 to 65 and when the engine was changed in...
Methyl ethyl ketone is used for the removal of old tank liners, you might have to place the tank in loads of positions as you will probably only...
The seams are bent like that on all tanks, it's for the throttle cables. You could get some MEK as that is used for removing liners.
Is it possible that the residue is a previous attempt of a failed tank sealer.
Well Done on getting it sorted :-)
If there is any sludge in the bottom of the oil tank then cleaning the sludge trap in the crankshaft is a must.
The two distorted bits on the seams are standard and i'm 99% sure the paint is standard/original as well. All the two-tone paint jobs were done...
Good explanation, i was thinking they were a part of the construction of a causeway :joy:
Anyone know what the blocks are for.
The 5th of November ;) just saying :bomb:
Enjoy the new bike Joe :-)
I think you will be amazed at just how clean that bike could be with a bit of work, being original is also a big bonus as most have been restored....
Thanks, now you can do the same with your UK spec 69 :-) The gauntlet has been laid down :joy:;)
The shorter pipes look far better, i still have my US spec one i restored years ago.[ATTACH]
Rare to see a UK spec 69 these days and it looks original as well, nice.
Champion WC548's are the correct plug caps, there are repro's available online and if you spend a little time even the originals can still be...