Separate names with a comma.
Plus £4.95 shipping and handling :-( I had to buy one but I think it's way too much for something that costs 1/4 as much on some bikes / cars....
Why is it that spares for Triumphs are so much more expensive than other bikes? Even third party prices are bloody stupid. Example - thermo switch...
I will nip to the hospital and pinch one of those saline bags and stands so I can go the gravity feed route. In my imagination I will have a crude...
I'm in the same boat. I found a tap off another tank but the mounting hole spaces are different. Bummer.
I will have a look at that tomorrow. Just discovered my fan switch doesn't work. Boiled up a treat she did :-)
Thanks for that, it's probably a bit late for repositioning the loom but I could see why it would make sense. Thanks for the other info too - that...
Just a quick sanity check if I may. I have Mikuni carbs fitted, they have 2 breather pipes and 2 feed pipes. I don't have a fuel tap yet but...
Oh bugger, you are absolutely correct, you were the first to say it and you were spot on. Sorry about that old chap, I was so wrapped up in the...
So I now have a fully working clutch. I cleaned it all really well after getting the busted bolt out. It seemed to be made of quite soft steel. I...
Bit more progress, about 75% there I would say. Tank flatted, exhausts on, lots of little bits done. Quite pleased really. [ATTACH]
LOL, well I went with Oldyam, he was spot on, the metal plates were all rusty on the surface and the friction plates or whatever they are called...
Thanks guys, I just had a few minutes spare so I whipped off the clutch cover. The hydraulic bit is definitely working fine, the plates were all...
Yeah, funnily enough I just fitted a new stand to it as the old one had rusted through. I have to do the oil and filter change tomorrow so once...
It was left full of oil so I don't think it will have rusted but something weird is going on. I have not really had much experience of bike wet...
Hi Folks, I've got a weird thing going on here. I have a 900 Trident, it's been stood for ages, just rebuilding it. Got to the clutch today, it...
Hi Guys, I have a project that somebody may like to take on. It's basically a 1992 Sprint frame with v5 that has been cut off at the back where...
Now that paint gate is over I have made a bit more progress. I still maintain that PJ1 is not suitable due to the high curing temperature before...
Christ on a effing bike!! Whatever you do - DO NOT USE PJ1 Engine paint. The useless pissing stuff is not petrol proof. I reinstalled my carbs...
I did it with a n aerosol. It's special engine paint. There are a couple of bits where I could have tidied up the castings a bit more but they...
Got my engine painted today, will let the paint harden for a day or two before I attempt to reunite it with the frame. Also got the first paint of...