Hi Tiglet, I'll be picking up a new Tiger 900 GT PRO in next couple of weeks and will be installing a TomTom Rider sat nav. That will need a switched power supply so I'm very curious about your suggestion Once I get the bike and assuming I can locate the white plug in your photo, what's the next step? Cheers!!!
Hi Ray, welcome from another newbie. How did you get on in the end? I'll be collecting a GT Pro in next couple of weeks and will need a switched live too (for a TomTom Rider GPS). Any info much appreciated Cheers!!!
i have just fitted a garmin Sat Nav To my tiger 900 gt and had same problem finding a switched live and also used the yellow permanant feed to rear light also got rear light fault, There is a 8 way multi plug under the pillion seat and the top right hand side is a switched live you can get the plugs off e bay called Econseal plugs and sockets plugged straight in and away you go, Also just fitted a rear flashing modulator to rear light made up lead using plugs and sockets so its inline with rear light and easily removed if not needed anymore.
hi ya buddy thanks for that , I’m about to install a innovv f/r camera set and like the idea of the ecoseal plugs. could you please put a photo,of your finished plug. Also is it it a 2,3 or 4 way plug set I need to purchase. ( currently sitting in bed so not looked under the bike at the plug yet) Many thanks.
This members not been on since last October, so you might be waiting a while. If you copy his reply and your request for information, and post it in the technical section I dare say someone will come up with the answer for you.
