675 2018 Street Triple Low Beam Headlights

Any clues from the handbook?

 

Odd. I don't really know anything about this specific model (my ST is a proper, round eyed one! ) but, in principle, all of the modern 'lights-always-on' type machines default to having low beam on as soon as the headlight dipswitch is used to switch off high beam.

Have you checked to see if there is a low beam fuse, and, if so, that it's not blown or corroded?

 

It could, I suppose, also be a fault or corrosion in the low beam switch contact or, perhaps, a break in the wiring loom by the headstock - a known weakness in some of these models.

For the first you might need to open up the switch housing and spray with contact cleaner; for the latter, try leaving the lights on the low setting with ignition on and move the handlebars from side to side, or wiggle the loom in this area.

Hope you manage to find it!

 

I can assure you the 675 Street Triple does indeed have a switch for the dipped beam, I have owned a few 675s and 765s all have this facility.

 

Switch the drl's off (the dip will then come on) then use the red "button/rocker" switch at the front of the LHS switch gear to alternate between.
Its where your lhs index finger is naturally when on the grips.
Just flick it backwards and forwards.
As it were..
I could be wrong though but thats how my speed rs works with drls. Not blatantly obvious tbh.