'96 Adventurer 900 - Carburetors

Discussion in 'Technical Help' started by PFEDave, Sep 12, 2020.

  1. PFEDave

    PFEDave New Member

    Aug 26, 2020
    1
    3
    Rockford IL
    #1 PFEDave, Sep 12, 2020
    I recently purchased a 96 Adventurer with only 3,200 mi on it. It had not been running for several years. I took it to a local shop here in the Chicago area and they told me that there was a problem with the carburetors. they could get the bike to start but couldn't keep it running. Apparently replacement carburetors for this year and model of bike are very hard to come by. Looking for a suggestions on how I might find some or what else might work aftermarket as a replacement.
     
  2. Callumity

    Callumity Elite Member

    Feb 25, 2017
    3,359
    800
    Nr Biggar
    #2 Callumity, Sep 12, 2020
    Eminently fixable. Your enemy is dirt - specifically the residue and varnish from evaporated fuel that is blocking the tiny holes in jets and ports. The carb bowls probably contain red sand too.....tank rust!
    Your friend is a carb cleaner aerosol to dissolve dirt but best of all an ultrasonic bath to bring everything back up shiny and new. You need to partially disassemble carb slides, float bowls and floats.
    You really want to rinse out the tank, clean the fuel tap and gauze (you might need a new neoprene gasket) and replace all the perished fuel lines and the vacuum caps on the carb inlet stubs. YouTube awash with ‘how to’ vids.
     
    • Like Like x 1
    • Agree Agree x 1
  3. stevethegoolie

    stevethegoolie Elite Member

    Oct 16, 2014
    2,456
    800
    East Riding of Yorkshire
    #3 stevethegoolie, Sep 12, 2020
    +1 for what Callumity said.
    I would just add that you could try a good fuel system cleaner in the petrol tank before you start dismantling everything. It may just save you a lot of work and/or money. Works on my Trident!
     
    • Like Like x 1
  4. topbanana0

    topbanana0 Well-Known Member

    Mar 27, 2016
    226
    93
    South Wales
    #4 topbanana0, Sep 12, 2020
    Take it apart and clean it, I've looked at the parts diagram. It looks very similar to the Keihin carb's on my Kawasaki.
    If it's struggling to idle, it's probably the pilot jet.
    Here is a video of me cleaning mine, it's quite straight forward.
     
    • Like Like x 2
  5. PFEDave

    PFEDave New Member

    Aug 26, 2020
    1
    3
    Rockford IL
    #5 PFEDave, Sep 14, 2020
     
  6. PFEDave

    PFEDave New Member

    Aug 26, 2020
    1
    3
    Rockford IL
    #6 PFEDave, Sep 14, 2020
    The shop that's working on my bike said that there are some plastic components inside the carburetors that have dried out while in storage and deteriorated to the point where they have split. They are needed for the proper function of the carburetors. They can get the bike started but it won't stay running. Back to my original ask. Does anyone have a line on possible replacements or which aftermarket parts I could use?
     
  7. Callumity

    Callumity Elite Member

    Feb 25, 2017
    3,359
    800
    Nr Biggar
    #7 Callumity, Sep 14, 2020
    • Useful Useful x 1
  8. Stuart Budd

    Stuart Budd New Member

    Sep 11, 2020
    5
    3
    Gloucestershire
    #8 Stuart Budd, Sep 14, 2020
    BST36s were used on lots of Jap stuff too … there is a plentiful supply of spare parts / rebuild kits and it's not a difficult job.
     
    • Like Like x 1
  9. Wire-Wheels

    Wire-Wheels Elite Member

    Apr 26, 2019
    2,510
    800
    California - USA
    #9 Wire-Wheels, Sep 16, 2020
    Just plug in Mikuni BST36 in to your search engine. You should have no problem. I have a set on one of my 900's. I haven't been in to them in a few.years now. Your mechanic should know how to find this stuff. ...J.D.
     
    • Like Like x 1
  10. PFEDave

    PFEDave New Member

    Aug 26, 2020
    1
    3
    Rockford IL
    #10 PFEDave, Sep 16, 2020
    What I need are the float assemblies. What seems to be strange is that these are plastic parts instead of brass or other metal and I am having a hard time finding these. Part #11 in the above diagram. Actual part number is 1240061-T0301 and seems to be out of stock everywhere I look.
     
  11. Callumity

    Callumity Elite Member

    Feb 25, 2017
    3,359
    800
    Nr Biggar
    #11 Callumity, Sep 16, 2020
    • Like Like x 1
  12. Callumity

    Callumity Elite Member

    Feb 25, 2017
    3,359
    800
    Nr Biggar
    #12 Callumity, Sep 16, 2020
    • Like Like x 1
  13. dilligaf

    dilligaf Guest

    #13 dilligaf, Sep 16, 2020
    • Funny Funny x 1
    • Agree Agree x 1
  14. Callumity

    Callumity Elite Member

    Feb 25, 2017
    3,359
    800
    Nr Biggar
    #14 Callumity, Sep 16, 2020
    G’day!

    9FE2DCB4-6B8C-4A0A-8BFB-BC578A679A7A.png
     
    • Funny Funny x 3
  15. PFEDave

    PFEDave New Member

    Aug 26, 2020
    1
    3
    Rockford IL
    #15 PFEDave, Sep 16, 2020
    • Like Like x 1
  16. Dan Mercer

    Dan Mercer Member

    Sep 25, 2021
    59
    18
    Sanford, Michigan
    #16 Dan Mercer, Oct 6, 2021
    Hi. I found Eurocycle in Vegas that I get my floats and other parts from. Here is the phone number. Chris is the guy you want to talk to.
    1 (702) 454-6269 Hope this helps.
     
  17. Dan Mercer

    Dan Mercer Member

    Sep 25, 2021
    59
    18
    Sanford, Michigan
    #17 Dan Mercer, Oct 6, 2021
    By the way, mine is a 96 triumph adventurer 900 cc.
     
Loading...
Similar Threads - '96 Adventurer 900
  1. RazMan

    Fairing & Luggage For '96 Trophy

    RazMan, Jan 8, 2022, in forum: Parts, Accessories & Clothing
    Replies:
    0
    Views:
    460
    RazMan
    Jan 8, 2022
  2. TXTrophy

    Trophy '96 Trophy 900 Start Issue

    TXTrophy, Aug 22, 2021, in forum: Sprint & Trophy
    Replies:
    2
    Views:
    1,207
    Adie P
    Aug 23, 2021
  3. Nenad

    Adventurer 900 Oil Check

    Nenad, May 6, 2025, in forum: Thunderbird
    Replies:
    5
    Views:
    435
    joe mc donald
    May 16, 2025
  4. Slickrock

    1996 Adventurer Turn Signal Relay Location And Pin Type

    Slickrock, Mar 7, 2024, in forum: Technical Help
    Replies:
    0
    Views:
    194
    Slickrock
    Mar 7, 2024
  5. Busa99

    Adventurer

    Busa99, Aug 28, 2022, in forum: Tyres
    Replies:
    6
    Views:
    1,339
    capt
    Sep 3, 2022

Share This Page

Sign up