Thruxton New Tubes Every Tyre Change?

Feckin taking the piss if you ask me
They probably gave the job to the young un and he fecked them
I wouldn’t have paid because I didn’t ask for them to be changed
Ask for the original tubes back because they’re yours

 

They’re having a laugh.....at your expense.

The major killer of tyres is UV light from which the tubes are completely shielded. They should last at least 4 or 5 yrs without issues, often longer.

 

Just had my tubed tyres replaced at Youles in Manchester. There was no mention of new tubes. I reckon you've been ripped off.

 

I changed them at the first tyre change in the belief that Triumph would have bought the cheapest tubes they could. I had Michelin tubes fitted and interestingly they hold pressure for longer now. As for future tyre changes, two tubes add about £30. It's not a fortune, so I'll probably change them. I see the sense in not doing it though, particularly if you're changing the rear at least every year. Mine will probably do 2 years.

 

Frustrating indeed. I hate tyre change time. And £48 for tubes is really steep but they have you don't they when they damage one and the only alternative to hand happens to be what they can sell you.

 

Go back to them and say that you didn't ask for them to be changed. This is a rip off covering their damage to the original.

 

I agree. If they damaged it, they should pay for it, not you. The fact it wasn't flat when you took it is proof they damaged it.

 

It might not actually have been them. When I took a TTR out for a test ride the valve split from the tube causing instant deflation. Fortunately I had just come off a motorway and was stopped at traffic lights, even more fortunate only about 0.247 of a mile from the dealer. Bike had under 200 miles on the clock. It didn't put me off buying one but the first job I did was send my wheels to Doug Richardson at Devon Wheel Company to convert them to full stainless steel and tubeless. No no longer need to think of tubes bursting or corrosion.

 

Would you happen to have any photo's of the wheels on the bike you could share? I quite like the idea of upgrading/improving but keeping the original look. Did you have stainless wheel rims as well as spokes? TIA

 

Also added one of the wheels for my T140V , he did last month. Both wheels stainless rims, spokes and nipples. Last a lifetime or two !

 

Thanks for that, the wheels seem to have a different profile which looks really nice. I notice they have different finishes, which did you go for?

I also wonder if it's cost effective to buy new hubs and then sell on the old wheels complete??? I'll have a look Ebay etc and see if there's any demand for them, perhaps from Speed Twin owners.

I think I shall look up the price of hubs and ask for a quote to build wheels with new hubs and also to re-use my hubs.

 

I have just had a look at the tubes that came out my T140V last week and one, Continental make has stamped on it " new tires - new tube" or "neuer reifen -neuer schlauch" or " nouvea pneu- nouveau tuyau" or " nouvo pneumatico-nouvo tubo" and finally "nuevo neumatico-nuevo tubo"

Not trying to stir things up I hope you realise !!

 

I sent the entire wheel to him with the tyre fitted and he used the original hubs but replaced the rims, spokes and nipples with stainless steel. Converted them to run tubeless and sent the wheels back ready for fitting. If your going to use him I would do so over the Winter so the wheels are back in time for Spring. You should phone him to chat about options, timescales etc. He is very good to deal with.

 

They change your tubes which will look like new, they then fit them to the next mugg who comes along, so the tubes you have in your bike belong to the mugg before you.