Grease Advice Please (sprint Gt)

Mobil XHP222 is supposed to be highly adhesive. I would clean up what you can and lightly repack with the same stuff.

 

Aeroshell 22 is a waterpeoof grease used on aircraft undercarraiges. May be a good bet.

 

Hi Our Gee, whilst you have the wheel off I would suggest you check the rear suspension linkages as triumph have always been very tight with the grease on those bearings.
as for grease I have always used copper grease with no problems.

 

I'm no expert on the matter, but I really don't think you should use copper grease.
You could probably damage the bearings.

 

I completely agree. Copper grease may be used around the eccentric adjuster, just a light smear. Thats what the factory put there.
Moly grease can also be used in the hub bearings if thats all you got.
And yes do the suspension linkages

 

how will copper grease damage the bearings??

 

Copper 'grease' is not technically a grease anyway, as it is not designed to lubricate in the way that a 'normal' grease would. It is designed to act as a barrier/anti-sieze compound. Using it to pack bearings would be an excellent way of destroying the bearing in double quick time...

 

Cheers for that I have been using the stuff for yrs with no idea It wasnt suitable. I knew it was called anti-seize compound but I thought it was ok as a grease as it can take temperatures up to 1100 deg C and was waterproof

 

The temp of copperslip is 800c. If you want 1100 best use Wurth AL1100

 

I have been using this

Delta D501 – Copper Anti Seize

http://delta-adhesives.co.uk/products/info/d501-copper-anti-seize/

 

Ok. Thats higher than most.

 

Is it OK as a grease though T552??

 

NO

 

Yes it is, just not as a bearing grease. Get specific bearing grease and you'll be fine - I use this stuff :

 

Thanks Biglad

 

Why you shouldn’t use copper ‘grease’ for your bearings
It’s a common misconception that copper ‘grease’ is actually a grease that you can use for your bearings. It isn’t.

Copper grease is actually an anti seize, and it’s definitely not intended to be used as a lubricant for your bearings. Whilst you can use copper grease on your brakes in some circumstances, it’s definitely not intended to be used on your wheel bearings. Doing this is a good way to destroy your wheel bearings completely, or at least make them more clunky.

Taken from greaseexpert.com

 

These might help

 

Good vids. But why go to that length and not remove the eccentic when they give so many problems with corrosion?
Btw copperslip is what they use at the factory here.

 

Yeah while your there, might as well do it.
Just wanted to do a separate video on it, but not got around to it yet