955 Speed Triple front brakes

I have an 04 speed triple and am not happy with the front brakes, they seem to lack feel and there seems to be a lot of movement at the lever. The pads have plenty of meat on them, I have changed the fluid and bled them countless times, I even bought a vacuum bleeding kit but there still seems to be a lot of movement at the lever before anything happens. They are powerful enough when they do come on but on my other two bikes there is less lever action by comparison. I only use two fingers usually but I have fitted a pair of dog leg levers and because of the shape of them the lever is touching my other two fingers by the time the brakes start working. Is this just how they are or has anyone got any ideas how to improve them?

Thanks.

 

Hi Dave,

OK, I took the pads out the other night and as I thought they don't look bad, there's only 14k miles on the bike so even if they are the originals it's not a lot. Anyway a mate of mine has just traded his Sprint ST in for a ZZR14 and had a new full set of EBC pads front and rear for the Triumph which he didn't get round to fitting, he's let me have them for thirty quid, which is cheap enough, so I will change them anyway and see if it makes any difference. To be honest I'll be surprised if it cures it as I've never noticed a marked difference in the feel at the lever on other bikes when the pads get low, but I am more than happy to be proved wrong ! I'll let you know.

 

Hi Dave,

Sorry I've not been back on to update on the brake problem I've been busy with other things. Anyway I took the old pads out wiped the pistons clean and syringed some fluid out of the reservoir then pushed all the pistons in as far as they would go. Then I fitted the new HH pads and topped the fluid up, pumped the lever a few times and hey presto the brakes are as sharp as you like, very little lever travel, great feel and loads of stopping power, so it looks like you have helped me out again! What I don't understand is that on my Aprilia the pads have 30k miles on them and there is no lack of feel or excessive lever travel, it was the same on my Kawasaki Versys I changed the pads at 30 odd K and they still felt OK. I suppose it's a case of each system is different, that's all I can put it down to, whatever it was I am more than happy with the brakes now, thanks for your help again.

Brian.