Top Engine Mount Bolts

I'm removing the protective bungs from my Daytona. Unfortunately I don't have the original bolts but World of Triumph tell me I need 2 different bolts - PFKL1214761 BOLT,TX,M12X1.25X64 and PFKL1214076 BOLT,HHF,M12X1.25X70.
As they are around £10-11 each from WoT I wondered if anybody has sourced them elsewhere??

 

if you search out M12 x 1.25 on Google there are plenty of options.

Looks like you need 65mm and 70mm bolts

Torx standard but you could use socket cap head hex etc.

 

Crikey £10-11 each

As Richard above google is your friend

 

https://www.ebay.co.uk/itm/M12-12mm...hash=item2a39b41e23:m:mDjIJ5Muw7bpIyNgmUjPcWw

Probably find a lot cheaper if you persevere.

 

Exactly, and 40p cheaper than the packet of 100 you can get from Poundland with the added bonus of not having to store 99 surplus ones.

 

So if you want two bolts you’ll probably end up paying about £15 for a poly bag with Triumph printed on it

 

10% discount from us as a TTF member.

 

It doesn’t matter if they fit or not it’s the fact you’ve got a poly bag with Triumph printed on it counts

 

I didn’t realise that you’d get two poly bags,,,,,that makes a huge difference.

Well worth spending the extra ££’s

 

I'd throw in the bubble wrap packet and cardboard box they're shipped in too. Not Triumph branded mind you.

 

You’ve convinced me Rich but only if there’s Triumph on the box
Then I can put the box on the coffee table in my lounge and look at it all goggle eyed

 

Forget the bolts, 2 branded poly bags and box please

 

Thought you would like an update
Turns out the bolts are used from the inside of the frame to mount the RG sliders - so bought nyloc nuts, good to go.
But no chance of branded bag n box