Speedmaster Speedmaster Turn Signal Problem

Hi there. I have a 2007 Speedmaster, the front right turn signal is not working and hyper flashing on right rear. The left side is working correct. I have checked the fuses and the RF globe all in order. I have swapped out the complete front unit with the left hand side and still not working front right. The front right unit I swapped to the left side is working when fitted on left side. Any suggestion as to where the fault lies is appreciated.

 

Hi, Thanks, I'm kinda thinking so as well. Any idea where I can download a wiring diagram? Cheers R

 

Yes I have one

 

I

Morning, I checked the continuity between flasher relay and bulb housing and all good, also earth wire to chassis and good. I note voltage fluctuating between 2 and 6v at bulb housing. Suspecting possible the flasher unit needs replacing?

 

Success yeah.... I opened the starter switch housing and there is a connector from the indicator unit inside. Found no continuity on one of the wires, opened heat shrink and found a pinched and broken wire. Problem solved. Thank you all very much for your input, I would otherwise be overwhelmed by electrical issues and resorted to a probable expensive auto electrician bill. Stoked, now I don't have any roadworthy issues when registering bike. Regards...