Lifting A Bike

‘It looks like it should be ok’......

In fact the header pipes are slightly lower than the frame rails so you need a couple of thin strips of wood to take the weight on the frame rather than the exhaust system. I cut a big ‘U’ out of thick marine ply as my frame shim.

The slight problem with your platform is access to sump plugs, filters etc., and it is not the best for stability with a small base and no tie down points. I use this type very successfully and you will find them on eBay etc., priced from £60 to £130 for essentially the same thing.... throw in lightweight ratchet straps at £10 and you can wheel and manoeuvre the bike around a concrete floor like it is on a dolly.

 

I have a skid plate on my T100 and with that the jack like you show works fine. I have one myself and is quite handy. With the skid plate installed no clearance issues with the header pipes or anything else.

 

I think it's a third party but same design.