Bolt Packages For 97 Adventurer 900 (same As Thunderbird 900)

Have a look here,

https://www.ebay.co.uk/sch/i.html?_...Bolt+kit+for+1997+Triumph+Adventurer&_sacat=0

 

Have a look at www.triumphparts.gbr.cc (aka Sprint Manufacturing) for model specific items or www.wemoto.com for more general bits and pieces. Both are UK based, I know, but will no doubt be happy to relieve you of a few of your $s!!

Edit .... almost forgot about www.squaredeals-ltd.co.uk for more specific stuff.
All of the above seem to have a good track record for good service etc.

 

If you want to change fastners to say stainless rather than buy kits it far cheaper to buy a box of say m6x25mm and cut to size.
For more odd sizes with m10x1.25 pitch etc D.Middleton has a unbeatable range

 

ebay Allen m6x25 100off = about £11.50
some may be expensive. one for the clutch slave is about 80mm long and 2 at about 50mm

 

Make sure you put a nut on the bolt "Before" you cut it off, then clean up the end with a file, then take the nut off and check there are no more burrs.

I would do this before you try to put any of the bolts into the ali engine casings and always use a lubricant on the threads !