Rear Fun Sprocket

Hi Darkman, What does that do to the acceleration & does it result in a need to re-calibrate the speedo?
Cheers. GAJA

 

Yes, going to post a thread now...

 

I think this mod will send the speedo off. That's what happened when I did it in my previous bikes. You will need to install "speedohealer" made by a company called Healtech Electronics and calibrate to read the correct speed. It's all plug and play

Unless of course this can be achieved through Tuneecu! !!I'm new to triple so I don't have a clue whether this can be done through tuneecu.

 

I went down one on the front and up two on the rear.
speedo does not read wrong, stays the same

 

That's super cool. In the past all gearing changes I did always threw the speedo off. This is brilliant because once I get use to the bike I'll be changing sprockets n no need to spend money on speedohealer; -)

 

If you have the latest model with engine modes then ignore this (I don't think TuneECU supports the latest models), but for 2015 '94R and earlier if you want to alter the speedo it can be done with a feature that's already in the standard ECU. Connect using TuneECU and you'll find speed calibration is set to 100% as standard, TuneECU enables you to alter that.

 

What difference does this make to the bike .is it noticeable.
Wayne

 

very, noticeable. on acceleration anyway, not concerned with top speed although 130 in 5th the other day so cant be to bad.
Plus i have lightweight wheels which i changed around the same time as the sprockets, so a combination of everything.

 

Fun fun fun .think ill be giving it a go

 

Only affects the speedo if you do it on the front iirc.

 

Not on pre '16 bikes, sensor is on gearbox. Don't know about latest model.

 

How did this affect the performance of the bike .

 

I've ridden it. Spins up like it's made from titanium!

These bikes pull like a class full of schoolboys in standard form as you know. I can confirm Tony's is a definate improvement. So much so I'm going to try either/or myself soon.

Atb

Bob

 

Rite .sounds like the next job on the list

 

I've been looking on the net for both sprockets -1 on the front +2 on the rear but can't find them . Where did you guys get them from ?

 

Cheers darkman