Intermitant No Start

Discussion in 'Speed Triple' started by glenn smith, Feb 3, 2025.

  1. glenn smith

    glenn smith Well-Known Member

    Dec 13, 2024
    43
    68
    Hawaii
    #1 glenn smith, Feb 3, 2025
    Got the same problem as Cole....stopped today to make suspension adjustments turned engine off with key only...restart lights came on cluster pushed starter nothing...turned ign off then on it started....few miles later stopped it did same thing but this time all cluster lights not working just the green icon... key on and off four times.,,,it started..i was twenty miles from home...back home in garage i pulled all the relays to check contacts all ok...tried twenty times started every time..... i dont use the kill switch to turn off just the ignition
     
    • Agree Agree x 1
  2. Trickle333

    Trickle333 Active Member

    Sep 23, 2024
    77
    28
    Staffordshire
    #2 Trickle333, Feb 3, 2025
    Mine did th same. Perfect for weeks. Then it would and then it wouldn't start. Garage dug under relay housing box and found corroded connection under there. Cut out bad and re soldered. Works perfect now. 2 hrs max labour.
     
    • Agree Agree x 1
  3. glenn smith

    glenn smith Well-Known Member

    Dec 13, 2024
    43
    68
    Hawaii
    #3 glenn smith, Feb 3, 2025
    The 2014 R has an imobilizer i think it could be the problem i checked the relays and wiring all ok...next time i stop i will take the key out... then stick it back in..i only have one key
     
    • Agree Agree x 1
  4. Trickle333

    Trickle333 Active Member

    Sep 23, 2024
    77
    28
    Staffordshire
    #4 Trickle333, Feb 3, 2025
    For me anything in line with th ignition system like alarms etc are always prone as th years go bye.... Remove and re solder is a good plan..
     
    • Agree Agree x 1
  5. glenn smith

    glenn smith Well-Known Member

    Dec 13, 2024
    43
    68
    Hawaii
    #5 glenn smith, Feb 4, 2025
    Last edited: Feb 5, 2025
    The Triumph dealer is 2 hours drive away... Thousand oaks ca..i guess the only way is to get another key from dealer...get it cut and drive there to pair the key with imobilizer...depends on how much$$...got text back from dealer $58 for blank key..didnt tell me how much to pair....i did ask :rolleyes:
     
    • Agree Agree x 1
  6. glenn smith

    glenn smith Well-Known Member

    Dec 13, 2024
    43
    68
    Hawaii
    #6 glenn smith, Feb 6, 2025
    • Agree Agree x 1
  7. glenn smith

    glenn smith Well-Known Member

    Dec 13, 2024
    43
    68
    Hawaii
    #7 glenn smith, Feb 9, 2025
    Last edited: Feb 9, 2025
    Pairing cost is $49-50...... i swapped the ems relay with the one next to it...this weekend no problems stopping/starting
     
    • Like Like x 1
  8. glenn smith

    glenn smith Well-Known Member

    Dec 13, 2024
    43
    68
    Hawaii
    #8 glenn smith, Feb 28, 2025
    Yesterday putting bike outside for ride turning ignition on pulling clutch lever..pushing starter...Nothing...turning ignition off and back on it started
     
    • Useful Useful x 1
  9. glenn smith

    glenn smith Well-Known Member

    Dec 13, 2024
    43
    68
    Hawaii
    #9 glenn smith, Mar 13, 2025
    Ahh yesterday after stopping for a few minutes..then back on, turned ignition on pulled clutch lever...pushing starter...nothing ..letting off clutch lever a bit it turned over...could be clutch switch as well....didnt do it again....the switch is not available as far as after checking...have to buy the whole lever assy...
     
    • Useful Useful x 1
  10. Pegscraper

    Pegscraper Elite Member

    Jun 12, 2020
    3,783
    800
    Yorkshire
    #10 Pegscraper, Mar 21, 2025
    I had a weird no start issue today on the Scrambler 1200. Called in at a local dealer for an unrelated issue. Came to start the bike, usual ign on, clutch in and hit the start button and the engine turned, probably 1/2 a turn, stopped and the entire dash went out. Turned the ign off, tried again and it started but I noticed the time & date and the trip meters had been reset. This could be an issue with a dodgy battery or a maybe a faulty starter? I stopped a couple of times on the way home and it restarted no problem.
    When I got home I checked the charging voltage and good at 14.4V. I tried a couple of starts and on the first one it just started but the battery dropped to just under 7V and on the second start it dropped to just under 10V.
    The bike is just over 1yr old (March 13th '24). I don't know what make the battery is or if the warranty even covers it.
    The bike had been stood for around 10days and I've noticed it never turns over as quick as the Kawasaki or the Husaberg but I just put it down to how the Triumph twins are. I think a proper battery test is the next step.
     
    • Agree Agree x 1
  11. glenn smith

    glenn smith Well-Known Member

    Dec 13, 2024
    43
    68
    Hawaii
    #11 glenn smith, Apr 3, 2025
    Got new key and origional paired yesterday ....hope it was worth it 200 miles round trip..
     
    • Like Like x 1
  12. glenn smith

    glenn smith Well-Known Member

    Dec 13, 2024
    43
    68
    Hawaii
    #12 glenn smith, Apr 8, 2025
    So far no problems...new key and pairing.... could have been the no starting problem
     
Loading...
Similar Threads - Intermitant Start
  1. renzovc16

    Sprint My First Triumph 06 Sprint St1050 , No Start , Only Cranks !

    renzovc16, Nov 24, 2025, in forum: Sprint & Trophy
    Replies:
    11
    Views:
    500
    renzovc16
    Nov 26, 2025
  2. newT120

    Cutting Out After Start Up

    newT120, Oct 7, 2025, in forum: Bonneville
    Replies:
    2
    Views:
    325
    newT120
    Oct 7, 2025
  3. glenn smith

    Pushing Starter Button

    glenn smith, Sep 15, 2025, in forum: Speed Triple
    Replies:
    5
    Views:
    788
    glenn smith
    Oct 9, 2025
  4. Pete270

    Triumph Street Twin 900 Sprag Starter Clutch Very Blue

    Pete270, Sep 1, 2025, in forum: Technical Help
    Replies:
    2
    Views:
    345
    Pete270
    Sep 1, 2025
  5. TonyG

    2013 Bonneville Starts When Clutch Pulled In

    TonyG, Aug 2, 2025, in forum: Technical Help
    Replies:
    33
    Views:
    1,913
    TonyG
    Aug 11, 2025

Share This Page

Sign up