Bonnie Engine

Discussion in 'Bonneville' started by mick nash, Sep 13, 2019.

  1. mick nash

    mick nash New Member

    Sep 13, 2019
    2
    3
    essex
    #1 mick nash, Sep 13, 2019
    Hi everyone,
    I have not run my 1964 bonnie for over 15 years. I have just drained the old oil and have found a split needle bearing in the bottom of the tray.
    Not being a Triumph head, I wonder if there are any needle roller bearings in the engine. I can only think maybe small end bearings.
    help please
     
    • Like Like x 1
    • Useful Useful x 1
  2. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,653
    1,000
    Southcoast of the UK Earth
    #2 darkman, Sep 13, 2019
    I assume you found the roller in oil drained from the crankcase as it couldn't find its way into the oil tank, if that is the case then someone has fallen foul of barroom talk and converted there engine to roller cam cages which is about the biggest crime you can do to a Triumph engine, or did you drain the gearbox as well as there are needles in there.
     
    • Useful Useful x 2
    • Like Like x 1
    • Agree Agree x 1
  3. mick nash

    mick nash New Member

    Sep 13, 2019
    2
    3
    essex
    #3 mick nash, Sep 13, 2019
    Thanks for the quick reply. the bike was bought by a USA airman when posted in England, then posted to Alaska and then back to England. it is in dead original condition and I doubt anyone has modded anything. Just one previous owner.
    have not drained the gbox yet.
     
    • Like Like x 1
    • Agree Agree x 1
  4. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,653
    1,000
    Southcoast of the UK Earth
    #4 darkman, Sep 13, 2019
    Most needle roller cam conversions have been done by the Americans :-( certainly no needles in the standard crankcase, although later engines did have a roller bearing on the primary drive side of the crank but thats far larger than needle roller.
     
    • Like Like x 1
  5. joe mc donald

    joe mc donald Joe
    Subscriber

    Dec 26, 2014
    15,266
    1,000
    slough / burnham
    #5 joe mc donald, Sep 14, 2019
    Mick Nash
    Welcome to the family. We need a picture of the steed to feed our passion. Can't help you out on the question. But Darkman is seldom wrong so you are in safe hands. Do try to take a picture of the roller and lets have a look.
    Regards
    Joe
     
    • Like Like x 1
Loading...
Similar Threads - Bonnie Engine
  1. CJExpat

    Poll - Have You Had Bonnie Engine Gearbox Issues?

    CJExpat, Jan 10, 2021, in forum: Bonneville
    Replies:
    32
    Views:
    16,633
    Pete B
    Dec 9, 2022
  2. Rosser

    07 Bonnie Oil Leak After Engine Guard Install

    Rosser, Mar 21, 2020, in forum: Technical Help
    Replies:
    4
    Views:
    863
    Rosser
    Mar 22, 2020
  3. Bunji81

    Bonnie 1200 Engine Cases Daft Question Alert...!!!

    Bunji81, Jan 22, 2018, in forum: Bonneville
    Replies:
    0
    Views:
    966
    Bunji81
    Jan 22, 2018
  4. Tom17

    Bonnieville t120 engine rebuild cost

    Tom17, Nov 23, 2016, in forum: Bonneville
    Replies:
    3
    Views:
    8,733
    Wessa
    Aug 3, 2018
  5. BruLan

    Bonnie Engine Management Light

    BruLan, Jul 15, 2016, in forum: Technical Help
    Replies:
    7
    Views:
    1,494
    BruLan
    Jul 16, 2016

Share This Page

Sign up