Separate names with a comma.
Thanks for this reply. I am thinking that there may be a problem in the boyer - so will need to isolate each piece now. I'll let you know - thanks...
Here is a link to a YouTube video of my bike running today - in case any members can diagnose from the video. Thanks! [MEDIA]
On another post I hade the valve issue brought up. I suppose it could be something like this. The whole thing started after a long ride some...
From another post I followed this advice today - so far: I did wire directly from the battery -ve terminal to the transistor box white wire. I...
There is plenty of power at the battery and the coils, but no spark. Perhaps there is a way to bypass the ignition switch to see if it is the switch?
OK, just now getting back to diagnose and fix this T100. So I went ahead and got new coils and plug and leads and installed them. Now, when trying...
I'm still moving forward on this project and wonder if any members know where I might get an exhaust system for this Rickman Mark 3, with a...
Any experience with Ceriani Forks out there? I have 35mm used Cerianis, but I can't seem to find a diagram for them to figure out how to take them...
OK darkman, thanks that is a big help.
Engine case numbering issue - so when I got this engine, T120R DU45678, I realized I had a 1967 engine. The primary cover was not on the machine...
Thanks Darkman! I think I'll be needing a thicker copper head gasket to fix the clearance on the skinned head. In another forum I was also...
Head and Cylinder Clearance Issue. So I thought after getting the rear wheel aligned I'd put the rest of the engine together. Got the pistons and...
Rear Wheel Alignment fixed! So, I was able to get my rear wheel alignment fixed. It seems the PO of this project built the wheels, however as this...
So I think I know the problem with the wheel not centering in the swingarm. I got in touch with the previous owner of the frame and wheels and...
