Separate names with a comma.
Thanks also to D’ecosse for his advice much appreciated
Well to conclude , aftermarket magnet fitted , spun wheel and speedo now working! Dozers Dad was correct in diagnosing magnet problem. Old bike...
Hi Thanks, I replaced ECU with one purchased off eBay , this maybe the problem . I have switched back to the original but still need to test. I...
[ATTACH] So . Found this and currently waiting for my outlaw to send me a resistor to make up a test circuit! However write up says to rotate...
Not sure if anyone had a wiring diagram for the speed four ?
Just appears to have a two pronged driver within the wheel which spins within the pickup . Bit like the old cable driven speedo on old school...
hi , all help appreciated. Digital clocks all work fine except for the speedometer which reads 0 . Just pulled the front wheel and checked cables...
Do you have a multi meter or a test lamp / lead ?
thanks Johnnnnny !!
inlet valves 1-8 measured and valves 1,2 and 5 tight rest are ok in spec .20 or .18: Shims on 1,2&5 are 260, 262, 262. clearances measure .127,...
Hi all having similar problems, when warm bike not keen on restarting! just did valve check and need to do some adjustment on inlet shims. exhaust...
