Separate names with a comma.
Recently purchased a 3D printed bellmouth off eBay for only $20 from musicguru69. Very satisfied with the product. Nice to see someone taking...
I drilled a small hole in the o-ring cavity & sprayed Deoxit into it. It's working. Thanks for all your suggestions.
Tested my TPS and it's as dead as a door nail. Haven't been able to locate a new or used replacement. Tried spraying Deoxit into it but it looks...
Yes, I'm aware that I may need to change the sensor. If the engine dies after the coil change I'll replace the sensor. Close is good enough for...
I'm not making these changes for performance. The bike is plenty fast for me. I just want to remove the constraints to allow the engine to work...
Let's gather our collective successful upgrades to give others an understanding of what works. We make performance upgrades to allow our bikes to...
Just ordered a 3D printed bellmouth intake for my 06 T100. Also ordered bigger main jets & a K&N air filter. I have a new Nology ignition coil &...
Just put on a set of 2006 T100 OEM silencers with partial baffle removal on eBay....
Joe, Sounds like you're guessing. Are you?
