Clutch pin mod

Discussion in 'Technical Help' started by Jody, Dec 3, 2016.

Page 2 of 2
  1. Jody

    Jody Active Member

    Oct 9, 2016
    143
    43
    Nuneaton
    #21 Jody, Dec 7, 2016
    Aye....

    Hence me filing the arse out of my standard pin

    Plates came today....will fit them Friday and see how we go
     
  2. sprintdave

    sprintdave Nurse, think it's time for his medications.
    Subscriber

    May 25, 2014
    1,643
    750
    Birmingham
    #22 sprintdave, Dec 8, 2016
    It is a very pretty pin tho. Lol.
    Good luck with the clutch rebuild Jody. Drum roll.
     
  3. Jody

    Jody Active Member

    Oct 9, 2016
    143
    43
    Nuneaton
    #23 Jody, Dec 8, 2016
    Ha ha cheers buddy....
     
  4. Jody

    Jody Active Member

    Oct 9, 2016
    143
    43
    Nuneaton
    #24 Jody, Dec 8, 2016
    Just changed my plates.....

    Took all of 20 minutes.... I've had my engine covers off so much it's like an F1 pitstop now :D

    Actually had some oil inside my clutch hub wooo hooo modded pin is working

    Inner and outer plates had oil on them but middle ones were dry still...think the sticking is stopping the oil getting in a bit

    Anyway new EBC's are in ( after a 3 hour soak as recommended on the back of the box before I get prophecies of apocalypse and devil guinea pigs coming to nibble me to death for my heathen acts)

    The EBC's are a lot different....they have a lot bigger friction pad width and less gaps between the pads....

    Let's see how they go !
     
    • Like Like x 1
  5. sprintdave

    sprintdave Nurse, think it's time for his medications.
    Subscriber

    May 25, 2014
    1,643
    750
    Birmingham
    #25 sprintdave, Dec 8, 2016
    The saga continues........lol.
    Got my digits crossed for you
     
  6. Jody

    Jody Active Member

    Oct 9, 2016
    143
    43
    Nuneaton
    #26 Jody, Dec 8, 2016
    Cheers buddy...

    I'll look like a Gordian knot by morning the amount of things im crossing :D
     
    • Like Like x 4
  7. Jody

    Jody Active Member

    Oct 9, 2016
    143
    43
    Nuneaton
    #27 Jody, Dec 14, 2016
    Running my plates for a few days now and while better I'm still getting a bit of drag and clunky changes now and then...

    Steel plates got delivered today so I'll throw them in tomorrow morning before work, the steels had some blueing when I first had the clutch apart so possibly warped a bit ?

    Who knows....if this doesn't work im just gonna ride it till the gearbox grenades itself as there is nothing else I could try :D
     
  8. Jody

    Jody Active Member

    Oct 9, 2016
    143
    43
    Nuneaton
    #28 Jody, Feb 2, 2017
    Been running my new fibre plates, steel plates and updated Triumph clutch pin with Silkolene Fully Synth PRO 4 10w40 for around a couple of months now and still getting drag and sticking plates :(

    As every attempt for help from triumph was met with ' Take it to one of our dealers for an inspection' which is Hinckley code for ' If you give us some money' I contacted someone at EBC who has helped me out before and explained the situation and this was his reply...

    We don’t recommend the use of a fully synthetic oil – normally it causes slip problems but it could also cause them maybe to stick together as oil might not drain completely off the plates. Years ago I had a Suzuki GT500 X5 and used Bel Ray synthetic gear oil and same thing every morning the plates stuck together – so when you put the bike into gear it would shoot forward and stall, changed to normal mineral oil and problem went away.

    Think I might try some mineral or semi synth.....
     
  9. Crankypedals

    Crankypedals Member

    Jan 31, 2018
    29
    18
    Staffordshire
    #29 Crankypedals, Feb 4, 2018
    Hi Jody,

    So, a year down the line... do you still have the bike? Did you try semi synthetic oil? Did you ever solve the dragging issue?
     
  10. Sprinter

    Sprinter Kinigit

    Aug 17, 2014
    5,993
    1,000
    uk
    #30 Sprinter, Feb 4, 2018
    • Like Like x 1
  11. Crankypedals

    Crankypedals Member

    Jan 31, 2018
    29
    18
    Staffordshire
    #31 Crankypedals, Feb 4, 2018
  12. PaulMB

    PaulMB New Member

    Jul 31, 2020
    16
    3
    Lincolnshire
    #32 PaulMB, Jul 31, 2020
    Hi all, new here, but found this thread the other eve while Google searching for answers to the tight gearbox problem, it being almost impossible to find neutral whilst stationary and clutch drag.

    I've a 2011 1050 Speedie, currently just over 18,000 miles, which I bought 3 years ago with about 9,000 miles on it. It lives on its side-stand in my workshop, I don't get out enough on her because of work pressures and I do all my own maintenance.

    Anyway after reading about the mod to the clutch puller pin I decided to try the same, although I tried to replicate the spiral on the modified Triumph part, rather than putting a flat on the pin. I also ground a small groove at the end of the two spirals where they meet the shoulder to allow the oil to not only find its way along the pin but also escape into the inside of the clutch hub. Then I doubled the number of 3mm holes already drilled in the hub which will allow the extra oil to escape from inside the hub and lubricate the clutch plates.

    I did a 110 mile jaunt last night and the clutch didn't have any slip or drag, finding neutral was much much easier, almost perfect, whether rolling or stationary and down changing through all the gears was much easier as well.

    In the past I had found down changes couldn't be rushed, like I can on my GSX-R1100, but I had to go through a conscious procedure of clutch lever fully in, change gear whilst blipping, clutch out. Any attempt to change as fast as I can on my GSX-R, or with the clutch not fully pulled meant crunched gears. Not last night. I shall continue to monitor and report if I find it reverts to the old quality.

    Paul
     
    • Like Like x 2
Page 2 of 2
Loading...
Similar Threads - Clutch pin mod
  1. Shabuti

    Clutch Slipping On Kickstart After Oil Change?

    Shabuti, Nov 4, 2024, in forum: Vintage Classics
    Replies:
    10
    Views:
    1,003
    joe mc donald
    Nov 7, 2024
  2. Mike Thibodeaux

    Clutch Slipping 1969 Tr6r

    Mike Thibodeaux, Feb 16, 2021, in forum: Technical Help
    Replies:
    10
    Views:
    1,261
    speedrattle
    Feb 25, 2021
  3. MikeD

    1996 1200cc Daytona - Clutch Slipping When Hot

    MikeD, Aug 8, 2020, in forum: Technical Help
    Replies:
    14
    Views:
    2,026
    XCaTel
    Sep 22, 2020
  4. Samuel F

    [solved] Loss Of... / Increase Of Rpms [clutch Slipping]

    Samuel F, Mar 15, 2020, in forum: Technical Help
    Replies:
    15
    Views:
    3,923
    Wire-Wheels
    Mar 20, 2020
  5. StreetRS1981

    765 Clutch Slipping

    StreetRS1981, Jan 2, 2020, in forum: Street Triple
    Replies:
    1
    Views:
    2,208
    Callumity
    Jan 2, 2020

Share This Page

Sign up