Alarm problem

Hi Malcolm. Do you know what alarm it is?

 

Yeah, its a Triumph alarm with one triangle & one circular button on the fob. Hope this helps? :upyeah:

 

So, clever shit, is that a Datatool 1, 2, 3 or 4? Just askin'...

 

Correct, thats the kiddie :biggrin:

 

Well that's another Triumph technical question well and truly sorted in a mature manner. Surely CC will be happy. Can we get back to the banter now? :upyeah:

 

Perhaps CC should start doing satin carbon fibre alarm fobs....Just saying x :wink:

 

It sounds like a datatool c4 like mine. If the batt goes flat it thinks its being stolen. Try disconnecting the alarm box and re attaching. Or check if its got an inline fuse as it might have blown when swapping the battery. It will continue to sound if its blown.

 

Is it like this but with 'Triumph' instead of 'Datatool written on it?

 

Hi again guys! on the same subject same alarm syster is there a way the alarm can be de-activated ,say when the bike is being worked on? As soon as I remove the key from the ignition on the Sprint about 4 seconds after it activates the alarm again. Any advice would be greatly appreciated. Willy.

 

Is it a Datatool System 3?

 

Datatool System 3 pdf files...

DATATOOL » Support

 

I have just checked out the link you posted but none of the above. It's the same fob displayed on this thread but it has "Triumph" printed on the fob.

 

They are normal Datatool alarm systems but the remote may look different to the one on the pdf file because Datatool supplied custom made Triumph logo fobs for alarms fitted to Triumph bikes.

 

Ok! BA, I'll just have to experiment with the buttons to see if I can work it out . Cheers Mate . Willy.

 

Hi ! BA, I have it sussed , it's Datatool (Compact) Cheers once again!!

 

have you ad a look at the link that BetaAlpha posted? t hows how to put it in service mode.

 

Bloody keyboard's playing up again!