Engine management light?

So I've been away for a week and didn't use the bike much the week before this either. I went to use the bike Friday and had a delay starting the bike and then rode 7-8 miles and then later that day it started fine and I rode 7-8 miles home.

Today (Saturday) when I started the bike the engine management light came on, bare in mind it started fine. I rode 7-8 miles with the light on and the bike felt normal with no issues or noises. I've then gone to it tonight (8 hours later) and the lights still on, rode a couple of miles and again no issues.

I'm convinced it's a low battery that's triggered the light as it had no issue before I put it away last week but did have the alarm left on, but after riding 10 odd miles since it's started and it's not hesitating to turn over today could it be something else? What could cause this light to come on? How can I get rid of it? Is it still the battery, despite the battery being only 6-7 months old?

 

Sweet I've got a 9 mile journey home tonight so fingers crossed. Would the battery of triggered the light mind? As I'm just assuming here lol

 

05' Speed triple 1050 sorry I tend to leave out the good bits, when you mentioned the cold/hot are we talking no temperature bar on clocks or 1/2? As I've done it from no reading to 3-4 bar twice already, don't want to mess the third go up and have to start this process again.

P.s. What's tuneECU?

 

No luck it didn't clear, but I stopped off at the top of my road and turned the ignition on and off several times and it's cleared the EML off. Stay tuned, as I'm using it again tomorrow so hopefully it doesn't return..

 

8 miles later and no EML, so if anybody is reading in days to come and you have the same/similiar issue just turn your ignition on & off until the light clears!