That position just puts back light on classed as parking/side light but nothing on front thanks for your input
So if that works OK then that proves most things are working and fuses etc are OK. Does your bike have a switch for the lights are do they come on automatically? Andy
After another tinker had headlight open and yes there should be a little bulb in but it's blown,cant see what this parking light bit has to do with the main element of back light ??????
The parking light and the rear tail light are on the same circuit. If the stop lamp works and the tail light doesn't then replacement of the front parking lamp will be an aid in diagnosis. Am I correct that you said if you put the ignition key in position 3 the rear lamp lights up correctly. Sorry if I keep asking questions I'm just trying to get my head round it. Then I can hopefully offer meaningful suggestions. Andy
It's a bit of a basket to say it was working in this position now not,if I put multimeter onto the snap connector block under seat I get continuity to all three wires and stop light works will find small child and put into front. Confused as before all this the light was working on that element also rear parking light coming on ???? Bitch of a job
Sorry for stating the obvious but you have checked all the fuses, the blown front sidelight could have blown one? Andy
Doing that 2moro owned bike about 5-6 month never had side light lit on front only on back only found position 3 by turning key to far so didn't realise had front side light till I checked 2 day will see if I can pick one up will update when done
Put bulb in front small light fitting checked fuses still no parking lights or main back light time for some tea
Only the parking small light and rear main element not working, think it's either the snap connection or back light bulb holder.
There's more..... With the ignition key in position 3 parking light is it possible to check for 12v at fuse 10 using the frame or an earth for a reference. If that makes sense? Sorry if I'm asking dumb questions but I don't know how competent you are with electrics and multi meters. Andy
speedo lights up when you turn ignition on the second part I will try 2moro as I only checked the fuse to see if ok
Looking at the drawing if the speedo lights up then fuse 8 and everything before that is ok. Leaving the following. Ignition switch pin 2 should have 12v coming from it going to fuse 10. Fuse 10 should have a yellow wire going to the back light socket pin 3 that changes to a red wire to the lamp. Keep me posted. Andy
Fuse 10 to frame 12.9 v now little light at front comes on, this happened when I had multimeter on the fuse looked good nope so new fuse as you see wires are what you say. The back light has been on after going to take the back bulb out it came on this in position 3 more tea, the fuse box shown I know the speedometer fuse missing its the only one 5amp I have
So looking like progress. Are the connections in the fuse box a bit dirty? Maybe a little wd might improve them? Let me know if I can be of any more help. Andy
Well you have been very patient and your feedback has kept me digging at it so will give wd a go I still think it's something to do with back light horse will keep you in contact Cheers
