1967 Tiger Cub Clutch Issues

Discussion in 'Technical Help' started by Geoff U., Nov 11, 2024.

  1. Geoff U.

    Geoff U. New Member

    Nov 11, 2024
    0
    1
    Morgan Hill
    #1 Geoff U., Nov 11, 2024
    Just picked this T20SM up and trying to adjust the clutch springs. They seem to stick out too far, about 3/8" from the outside plate. Other photos of TC clutches show the head of the spring screw to be almost flush with the pin bolt. There are scrape marks from the spring bolts on the outer case. When I try and screw in the spring bolts to the top of the pin bolts, the clutch will not disengage.

    The springs, friction and steel plates all seem to be within standards.
    My springs are 1.500”/38MM, Friction plates (3) are .142”/3.6MM thick, Steel plates (3) are .065”/1.65MM.

    Any ideas or is this normal?

    Thanks, Geoff
     
  2. joe mc donald

    joe mc donald Joe
    Subscriber

    Dec 26, 2014
    15,014
    1,000
    slough / burnham
    #2 joe mc donald, Nov 12, 2024
    @Geof U Welcome to the family. Firstly make sure there is no play in the clutch drum. The springs should be screwed evenly i used to slacken the clutch cable at the bars then adjust the springs till the screw edge was even with the pressure plate as a starting point. Take the plugs out and spin the bike over gently and check the same gap all around the pressure plate and friction plates. Of course set the cables again first. There are a couple of peeps on here who are Gods at the smaller classics and i am sure they will jump to your aid very soon.
     
    • Like Like x 1
Loading...
Similar Threads - 1967 Tiger Cub
  1. tom wilson

    Triumph 500 Tiger 1967/8

    tom wilson, Aug 27, 2020, in forum: Vintage Classics
    Replies:
    2
    Views:
    1,720
    feckless
    Aug 30, 2020
  2. snattsas

    1967 T120 Restoration Gone South

    snattsas, Aug 10, 2023, in forum: Bonneville
    Replies:
    3
    Views:
    1,480
    malokam
    Sep 29, 2023
  3. emlupi

    1967 Triumph Bonneville Tt Special

    emlupi, Aug 13, 2022, in forum: Vintage Classics
    Replies:
    2
    Views:
    1,235
    emlupi
    Aug 15, 2022
  4. darkman

    1967 Tr6c Full Restoration For Su

    darkman, Nov 10, 2021, in forum: Builds & Projects
    Replies:
    191
    Views:
    20,405
    painless
    Jun 4, 2022
  5. Sundance

    1967/1969 Bonnie Rebuild Desert Sled Project - Any Advice

    Sundance, Sep 15, 2021, in forum: Vintage Classics
    Replies:
    371
    Views:
    33,357
    speedrattle
    Oct 24, 2022

Share This Page

Sign up