Tec 202 Camshaft - Street Twin 900

Yes, agreed on the shocks and a Hagon/YSS upgrade maybe down the line (also agreed on the FOX though they do look premium - which one would expect at that price!) .
I should have added above that your spoked look great and interesting to hear (as many others testify too) that no problems being tubed. So the T100 in black fit without issue? I had heard that but you the first I've seen to show. Currently £825 from Triumph https://triumphdirect.co.uk/products/black-wheels-a9648040 (but I'd get some £ back from selling the casts). Triumph World have a set for the T120s on a great deal (been on ages) but I guessing these won't fit the ST -
https://www.worldoftriumph.com/products/triumph-black-wheel-kit-a9648045.
I do like the aesthetics of my Crafton Atelier seat and prefer to the Motone offering but your custom seat also looks great and as if it might offer up a bit of added rider height (?) whilst also retaining the raised rear for pillion which I did like about the stock (as did my wife!).
You've got me thinking about those spoked T100s anyway!

 

Great that you made your own special tools and saved a fortune. The camshaft timing plate alone is a frightening £138 (World of Triumph).

 

Yes the T100 wheels are a straight swop. They were worth around £600 when I had them fitted and as Bill Smith's had no use for the original ST mag wheels they gave them to me. I sold them on this forum for around £350 I think.
No, the T120 wheels aren't a straight swop but that is a very good price.

 

Yes it is a damping adjuster but I can't remember what it adjusts . To be honest these shock are so basic I would be surprised if the adjuster made any difference. I'm not one for messing around with suspension settings. I recently noticed that TEC don't list them anymore and heard it was because the original supplier has gone out of business (or somesuch).

 

Yup, they are Motone side panels. I don't like the Street Twin logo and thought about respraying the original panels. Then I saw a pair on the Square Deals site, with 3 horizontal slots. They were inexpensive but lasted about half a dozen 'removals' before 2 of the fitting posts snapped off. After a couple of failed attempts to repair them they went in the bin. It was around this point I discovered Motone and the rest is history.
They don't cover any more of the frame than the originals, it's the seat that does that. I wanted the stepped look of the original but with the tuck'n'roll style. Aftermarket bench seats, of all makes, look like they're floating on top of the frame, which looks wrong to me. I wanted the seat to hug the frame.

 

Thought I'd show the Motone ribbed engine cover now fitted and you can just see the Motone footpeg which replaced the TEC pegs.

 

This is how the ST looks today (headlight bezel soon to be changed). Note the battered bash plate. There are two of the 3 Hondas it shares the garage with.

 

Many thanks for your words of wisdom.

 

A cam change was part of the facelift/upgrade by Triumph for the 2019 onwards Street Scrambler/Street Twin giving the bike an extra 9-10bhp. TEC say their cam just brings the older bikes up to 2019> spec.

 

I wouldn’t be surprised if this is the case. When I’ve ridden the machine I’ve never found it wanting. But it could really do with a sixth gear. When we went to Wales last year the fuel consumption was not good. We are off again next week but he’s taking his new machine this time. Thanks for your observations.

 

I will be fitting new chain and sprockets to his Panigale at the weekend so will check out the gearing. Thanks.