Hi, I have just joined up and would appreciate some help/advice on Triumph wet sumping, after a run it wet sumps within the next week, this can't be right, any help would be appreciated. Pete
Click on your profile (top right of screen, left of envelope) that will bring up your personal details. Scroll down the main section and it will say Location. Delete your postcode and put something more generic (Middlesborough, GA or the like)
Hi n welcome The problem is the oil pump normally. Usually a small piece of dirt in the pump causing the balls not to seat, strip remove clean and reseat the two balls and that should cure the problem or even better fit a new Morgo oil pump.
Peter Coates Welcome to the family. Yes click on your Avatar box just above your name. Then click on your profile. You can see if you click your post code there it will bring up a map of your address. Also would love a picture of the beastie. Just click the upload a file button bottom right corner and hey presto happy inmates with a real Bonnie to ogle. Joe.
Greetings, Peter, and welcome to the forum. I hope you get both your bike and your post code issues sorted. As you've seen already, members here are quite happy to help. We'd love to see a pic or two of your bike. That'll be another forum tech challenge to tackle after you master the profile edit. But if I could figure it out anyone can! Hope you enjoy the forum!
Peter, ahhh wet sumping, my favourite issue. Have a look here, the check list starts at post #5: https://www.thetriumphforum.com/threads/wet-sumping.27444/ If the problem persists then we'll help sort it with you. What have you tried, looked at, played with, done to the bike so far?