Lockdown Fever Antidotes

Discussion in 'Lounge' started by Smilinjack, Jan 11, 2021.

Page 1 of 4
  1. Smilinjack

    Smilinjack Guest

    #1 Smilinjack, Jan 11, 2021
    Last edited by a moderator: Jan 11, 2021
    There's clearly a bit of cabin fever for us all, it's fair to say. I've been watching Youtube far more than is healthy, although seen some great stuff-some of these wartime recollections from old servicemen is very humbling. LFL American Football was an eye opener though :eek:. Bizarre at the very least. And of course, being stuck in all day so often leads to an expedition onto Amazon. So, I've bought an Airfix plastic model kit of a Spitfire. Built tons of these as a kid, and here I am again. What are others doing to overcome these long days and the feeling that your life is spiralling down the toilet? :)

    https://www.airfix.com/uk-en/supermarine-spitfire-mkia-starter-set-1-72.html
     
    • Like Like x 3
  2. Octoberon

    Octoberon Crème de la Crème

    Jul 2, 2020
    2,250
    1,000
    Peak District, Yorkshire
    #2 Octoberon, Jan 11, 2021
    I found myself looking for more LEGO Technics motorcycles to build the other day. I only found one - a Harley. As if life wasn't cruel enough already.
     
    • Funny Funny x 5
    • Like Like x 2
  3. OldNick

    OldNick Elite Member

    Aug 11, 2019
    1,258
    743
    South Coast UK
    #3 OldNick, Jan 11, 2021
    I’ve built a trainset in between the times I’m supposed to be working:kissing:

    My daughters love it - not:confounded:
     
    • Like Like x 2
    • Funny Funny x 1
  4. David Cooper

    David Cooper Triumph Rocketeer.
    Subscriber

    Jun 23, 2018
    27,035
    1,000
    The Land of the Prince Bishops.
    #4 David Cooper, Jan 11, 2021
    I started watching Youtube videos about the guns you see in cowboy films, and war films.


     
    • Like Like x 2
  5. Doc Strange

    Doc Strange Senior Member

    Aug 8, 2019
    717
    243
    UK
    #5 Doc Strange, Jan 11, 2021
    Funny, I was looking on their site before Christmas too for the same reason.

    I was thinking of getting the kit for the King Tiger tank that I always wanted as a kid but never got.

    So are you going wheels up or wheels down?

    My own ways of killing time when the garage is too cold are:
    Duolingo - improving my French for when I can go over to Belgium to watch the racing again
    &
    Learning to play the piano - which being old and deaf is unlikely to lead to an exciting new career and lots of groupies, but is keeping me busy as I've never learnt to read music before and have no ability at any other instrument!

    DS
     
    • Like Like x 5
  6. Smilinjack

    Smilinjack Guest

    #6 Smilinjack, Jan 11, 2021
    By default I'm a wheels up kinda guy, but this model may finish up on the office window ledge so the decision is made for me. I don't think they come with that little clear plastic stand any more but hopefully I may be wrong. I'd like to do the warships again but not really got space.
    Got my Golden Owl in Spanish on Duolingo last year, but have let it slide somewhat. Could be a good time for a reboot. :)
     
    • Like Like x 2
  7. andyc1

    andyc1 Lunarville 7, Airlock 3

    Feb 4, 2017
    2,928
    1,000
    N. Ireland
    #7 andyc1, Jan 11, 2021
    Always play guitar more this time of year anyway, but really spending a lot of my time at it currently! Not supposed to be out with the camera either in this stricter lockdown so lots of guitaring... and even a picture of said guitar :cool:
    DSCF5078-2.jpg
     
    • Like Like x 13
  8. andyc1

    andyc1 Lunarville 7, Airlock 3

    Feb 4, 2017
    2,928
    1,000
    N. Ireland
    #8 andyc1, Jan 11, 2021
    The airfix model sounds cool. I made loads when I was young... then I got a bb gun, and I shot them all to bits :worried:
     
    • Funny Funny x 4
    • Like Like x 1
    • Agree Agree x 1
  9. curly

    curly Noble Member

    Jul 3, 2016
    758
    443
    Burton Upon Trent
    #9 curly, Jan 11, 2021
    Unfortuntely, eating and drinking, to excess
     
    • Agree Agree x 5
    • Disagree Disagree x 1
  10. DCS222

    DCS222 Guest

    #10 DCS222, Jan 11, 2021
    Nice flame...

    I should be playing more guitar but finding the impetus difficult... I am, however, slowly exploring the vast world of home recording!
     
    • Like Like x 4
  11. Hubaxe

    Hubaxe Good moaning! aka Mr Wordsalad :)

    Mar 25, 2020
    1,694
    800
    Aix Les bains - French Alps
    #11 Hubaxe, Jan 12, 2021
    Last year I've put my hands in 3D printer world.
    I've now passed the step to a small CNC machine for engraving, and laser.
    The objective is to get enough knowledge to build from scratch (and from chinese parts :) ) a bigger CNC, able to carve a guitar body or a guitar neck for example.
     
    • Like Like x 4
  12. DCS222

    DCS222 Guest

    #12 DCS222, Jan 12, 2021
    I used to be a CNC programmer in another life. Have you seen this chain drive mill? Jump to 12:30 for the routing and carving... pretty good for a cheap set up,

     
    • Like Like x 2
    • Thanks Thanks x 1
  13. Hubaxe

    Hubaxe Good moaning! aka Mr Wordsalad :)

    Mar 25, 2020
    1,694
    800
    Aix Les bains - French Alps
    #13 Hubaxe, Jan 12, 2021
    I help you with home recording, you help me with cnc :) That's a good deal?
     
  14. Oldskool

    Oldskool Elite Member

    Jan 29, 2019
    3,008
    800
    Hertfordshire
    #14 Oldskool, Jan 12, 2021
    No CNC machines or musical instruments for me. Have decided to do the NC 500 in September so learning to speak Scottish and practicing my introduction speech for when we get to Scotland, in case Nicola is manning the border by then. Watching a lot of Jimmy Krankie videos and just aboot got the hang of it noo .:p
     
    • Funny Funny x 10
    • Useful Useful x 1
  15. DCS222

    DCS222 Guest

    #15 DCS222, Jan 12, 2021
    Last edited by a moderator: Jan 12, 2021
    I’ll do what I can, but things have moved on a pace since I left engineering (1996)... I was mainly programming Laser profile cutters with a couple of lathes and mills... not these multi-axis modern devices! Our set-up was so old even then... we had Olivetti M40 (edit - trying to find the model number, not convinced on m40) computers that were programmed in “Basic”... the machine code was punched out in one inch ticker-tape and the tape was taken to the shop floor and fed into the CNC machine! Class
     
    • Like Like x 4
  16. DCS222

    DCS222 Guest

    #16 DCS222, Jan 12, 2021
    This is the bugger, the L1 m40... twin 8” floppy disk drive too!

    upload_2021-1-12_8-30-21.jpeg

     
    • Like Like x 3
  17. Hubaxe

    Hubaxe Good moaning! aka Mr Wordsalad :)

    Mar 25, 2020
    1,694
    800
    Aix Les bains - French Alps
    #17 Hubaxe, Jan 12, 2021
    I was joking. I've an heavy programmer background. Started to work on IBM 36 machines, where floppy disc had the size of an LP vinyl. :laughing:
    I don't program anymore for a living, but can nail the logic.
    It's now fun to dig in open source material on the web.
    CNC has grbl open source that works well enough for an hobbyist like me.
    Made some arduino stuff, like a smart xlr/jack cable tester.
    We are living in a very exiting period for tech hobbyist. Lots of open source stuff available, very affordable gears and parts.
     
    • Like Like x 2
  18. andyc1

    andyc1 Lunarville 7, Airlock 3

    Feb 4, 2017
    2,928
    1,000
    N. Ireland
    #18 andyc1, Jan 12, 2021
    Very interesting! I program and operate wood cutting cnc machines as my day job :)
     
    • Like Like x 2
  19. Smilinjack

    Smilinjack Guest

    #19 Smilinjack, Jan 12, 2021
    Interesting stuff. Got some clever buggers on here, evidently. But @DCS222 8" floppy drives :scream: do you need many discs? Are they still available? :)
     
  20. tcbandituk

    tcbandituk TC
    Subscriber

    Apr 8, 2016
    2,871
    1,000
    Reading
    #20 tcbandituk, Jan 12, 2021
    It's sort of like a large airfix kit except you start with a complete bike and disassemble in lockdown....:D

    Got the tricky bit next, putting it all back together :rolleyes:

    20200925_140413.jpg

    20201202_125233.jpg
     
    • Like Like x 6
    • Funny Funny x 2
Page 1 of 4
Loading...
Similar Threads - Lockdown Fever Antidotes
  1. BonnieCat

    Lockdown For Us In The Netherlands Again

    BonnieCat, Dec 18, 2021, in forum: Lounge
    Replies:
    56
    Views:
    4,373
    tim8061
    Dec 23, 2021
  2. Markus

    Lockdown The Fourth!

    Markus, Nov 22, 2021, in forum: Lounge
    Replies:
    23
    Views:
    2,606
    Wire-Wheels
    Dec 5, 2021
  3. Mark9

    Lockdown Insurance

    Mark9, Mar 21, 2021, in forum: Triumph General Discussion
    Replies:
    0
    Views:
    755
    Mark9
    Mar 21, 2021
  4. BonnieCat

    Five Week Lockdown For Us

    BonnieCat, Dec 15, 2020, in forum: Lounge
    Replies:
    26
    Views:
    3,145
    Peter B
    Dec 21, 2020
  5. Malcolm Woods

    Lockdown Project

    Malcolm Woods, Dec 7, 2020, in forum: Lounge
    Replies:
    12
    Views:
    2,020
    Hubaxe
    Dec 15, 2020

Share This Page

Sign up